Specifications
A
Specifications
This appendix provides general specifications, including mechanical, electrical and thermal specifications, for the PrPMC800/800ET.
Mechanical Characteristics
The mechanical outline of the PrPMC800/800ET module conforms to the dimensions defined by a single wide, standard length PMC module (74mm x 149mm x 10mm stacking height). The side 2 component height of the PrPMC800/800ET conforms to the standard side 2 height dimension (3.5mm).
Electrical Characteristics
The PrPMC800/800ET only requires a 3.3V +/- 5% input. The estimated +3.3V current draw and power for various configurations of the PrPMC800/800ET are shown in the following table.
Table A-1. Power Requirements for PrPMC800/800ET
Module Configuration | Amps/Watts @ 3.3V | |
|
|
|
| Typical | Maximum |
|
|
|
100 MHz Bus with | 3.42A/11.3W | 4.00A/13.2W |
MHz |
|
|
|
|
|
100 MHz Bus with MPC7410 Processor @ 450 MHz | 3.27A/10.8W | 3.82A/12.6W |
– Altivec disabled |
|
|
|
|
|
100 MHz Bus with MPC7410 (N) Processor @ 400 | 2.51A/8.28W | 3.08A/10.2W |
MHz – Altivec disabled |
|
|
|
|
|
100 MHz Bus with MPC7410 Processor @ 500 MHz | 4.10A/13.5W | 4.51A/14.9W |
- Altivec disabled |
|
|
|
|
|
PrPMC800/800ET Processor PMC Module Installation and Use (PrPMC800A/IH5) | 57 |