Motorola manual Motorola 68HC08LD POD rev. B, POD Hardware Reference

Page 1

V1.1

POD Hardware Reference

Motorola 68HC08LD POD rev. B

Ordering code

IC20187

Thank you for purchasing this product from iSYSTEM. This product has been carefully crafted to satisfy your needs. Should any questions arise, do not hesitate to contact your local distributor or iSYSTEM directly. Our technical support personnel will be happy to answer all your technical support questions.

All information, including contact information, is available on our web site www.isystem.com. Feel free also to explore our alternative products.

iSystem constantly yields for development and therefore certain pictures in this documentation may vary slightly from the actual product you received. The differences should be minor, but should you find more serious inconsistencies of the product with the documentation, please contact your local distributor for more information.

This document and all documents accompanying it are copyrighted by iSYSTEM and all rights are reserved. Duplication of these documents is allowed for personal use. For every other case a written consent from iSYSTEM is required.

Copyright  2004 iSYSTEM, GmbH.

All rights reserved.

All trademarks are property of their respective owners.

www.isystem.com

 iSYSTEM, March 2004

1/12

Image 1
Contents POD Hardware Reference Motorola 68HC08LD POD rev. BIn-Circuit Emulation PODs Final Target Application Test Top board Emulated CPU CPU Mask InformationElectrical and Logical Differences Clock SettingsAnalog/Digital Converter Ports Voltage settingsPosition Vcc level Jumper Set RemovedInternal RAM, Internal Eeprom General HC08 Emulation NotesTarget Adapters Signal Connector34 36 38 40 42 44 46 33 35 37 39 41 43 45 POD Target Layout iSYSTEM, March 11/12  iSYSTEM, March 12/12