Motorola ML910TM manual IV. Enabling the RF Pass-Through Option Using MLAA and MLUA

IV. Enabling the RF Pass-Through Option Using MLAA and MLUA

1.Launch the ML Administrator Application.

2.Go to the RF Pass-Through options available in MLAA (highlighted in Figure 1, below).

3.Change the RF Pass-Through User Control from [Disable] to [Enable] (Figures 2 & 3).

4.Select [Write to EC] to change the setting (Figure 4), a message will be shown after the setting is updated to System EC (Figure 5).

1 2

3 4

5

ML910 R1.0 RF Pass-through Upgrade Procedure, Version A 19