Motorola ML910TM Step-by-Step Procedure, ML910 R1.0 RF Pass-through Upgrade Procedure, Version A

Page 3
Step-by-Step Procedure

Step-by-Step Procedure

Important Before you begin this procedure confirm that the current version EC BIOS running on the ML910 notebook is 4.7 or earlier. If the EC BIOS is 4.8 or later you will not need to update it, i.e., skip steps 11 through 14 in the EC BIOS Upgrade Procedure. Steps 1 through 10 will still be required in order to access the applications files from the downloaded ISO image.

To determine the EC BIOS version:

a.Double click on the ML User Application icon in the System Tray.

b.Check the EC Version where highlighted below.

If you intend to use the Nero 8 Essentials application, install it if it has not already been installed. You may select a “Typical” installation, which is sufficient for this procedure.

Caution

As a standard practice when performing procedures like this, it is recommended that critical user data be backed up in the event an error or problem occurs.

ML910 R1.0 RF Pass-through Upgrade Procedure, Version A

3

Image 3
Contents 2 Support RF Pass-through in Retrofitted ML900 Docking Stations ML910 R1.0 RF Pass-through Upgrade Procedure, Version APurpose and Requirements What You Will NeedML910 R1.0 RF Pass-through Upgrade Procedure, Version A Step-by-Step Procedure ML910 R1.0 RF Pass-through Upgrade Procedure, Version ATo determine the EC BIOS version Perform Procedures I, II and III in order I. EC BIOS Upgrade Procedure6. Click on “Disc Image or Saved Project” 5. Click on “Image, Project, Copy”9. Burning process and status are displayed ML910 R1.0 RF Pass-through Upgrade Procedure, Version A II. ML User Application Upgrade Procedure a. MLSERVICE foldera. Click Start Control Panel Add or Remove Programs 5. Click Yes to install Microsoft Visual C++ 2005 Runtime Libraries 6. Double-click on SETUP.EXE in the MLSERVICE folder7. Click the Next button to continue 8. Accept the default settings and click the Next button 9. Click the Next button to start the installation10. Please wait while MLService is being installed ML910 R1.0 RF Pass-through Upgrade Procedure, Version A 12. Double-click on SETUP.EXE in the MLUA folder 14. Accept the default settings and click the Next button13. Click the Next button to continue 16. Please wait while ML User Application is being installed 15. Click the Next button to start the installation17. Click on the Close button when ML User Application is successfully installed III. ML Administrator Application Upgrade Procedure 2. Uninstall the existing version of the ML Administrator Applicationb. Select ML Administrator Application and click Remove to uninstall 6. Accept the default settings and click the Next button 4. Double-click on setup.exe 5. Click the Next button to continue8. Please wait while ML Administrator Application is being installed 7. Click the Next button to start the installation9. Click on the Close button when ML Administrator Application is successfully installed IV. Enabling the RF Pass-Through Option Using MLAA and MLUA 5. Launch the ML User Application 11. Note that the RF Pass-Through Option will not be applicable under the following conditions