Motorola ML910TM manual ML910 R1.0 RF Pass-through Upgrade Procedure, Version A

Page 20

5.Launch the ML User Application.

5.Launch the ML User Application.

6.Select the RF Pass-through option available in the MLUA.

7.Before the RF Pass-through User Control in MLAA is changed to [Enable], the RF Pass-Through Control will be grayed-out.

8.After the RF Pass-through User Control in MLAA has been set to [Enable], the default setting will be [Automatic Selection].

9.User can select [Manual Selection] to either Enable or Disable the RF Pass-Through. [Apply] needs to be pressed by User in order to make the selection valid.

10.Enabling the RF Pass-Through will disable the Internal Antenna and vice versa.

1

2

3

4

20	ML910 R1.0 RF Pass-through Upgrade Procedure, Version A

Image 20

Contents ML910 R1.0 RF Pass-through Upgrade Procedure, Version A Purpose and RequirementsWhat You Will Need 2 Support RF Pass-through in Retrofitted ML900 Docking StationsML910 R1.0 RF Pass-through Upgrade Procedure, Version A To determine the EC BIOS version Step-by-Step ProcedureML910 R1.0 RF Pass-through Upgrade Procedure, Version A I. EC BIOS Upgrade Procedure Perform Procedures I, II and III in order5. Click on “Image, Project, Copy” 6. Click on “Disc Image or Saved Project”9. Burning process and status are displayed ML910 R1.0 RF Pass-through Upgrade Procedure, Version A a. Click Start Control Panel Add or Remove Programs II. ML User Application Upgrade Procedurea. MLSERVICE folder 7. Click the Next button to continue 5. Click Yes to install Microsoft Visual C++ 2005 Runtime Libraries6. Double-click on SETUP.EXE in the MLSERVICE folder 10. Please wait while MLService is being installed 8. Accept the default settings and click the Next button9. Click the Next button to start the installation ML910 R1.0 RF Pass-through Upgrade Procedure, Version A 13. Click the Next button to continue 12. Double-click on SETUP.EXE in the MLUA folder14. Accept the default settings and click the Next button 15. Click the Next button to start the installation 16. Please wait while ML User Application is being installed17. Click on the Close button when ML User Application is successfully installed b. Select ML Administrator Application and click Remove to uninstall III. ML Administrator Application Upgrade Procedure2. Uninstall the existing version of the ML Administrator Application 4. Double-click on setup.exe 5. Click the Next button to continue 6. Accept the default settings and click the Next button7. Click the Next button to start the installation 8. Please wait while ML Administrator Application is being installed9. Click on the Close button when ML Administrator Application is successfully installed IV. Enabling the RF Pass-Through Option Using MLAA and MLUA 5. Launch the ML User Application 11. Note that the RF Pass-Through Option will not be applicable under the following conditions