![](/images/new-backgrounds/1202497/202497209x1.webp)
JMicron RAID
JMicron RAID BIOS Utility
Be sure to set RAID mode for the JMicron 36x ATA Controller in BIOS before configuring the JMicron BIOS utility. After that, save the configuration and exit. During boot up (POST), press CTRL+J to enter the JMicron BIOS RAID utility.
The RAID Utility menu screen will be displayed. A brief description of each section is presented below.
Main Menu
Create RAID Disk Drive - Create a new legacy RAID set. Delete RAID Disk Drive - Delete a legacy RAID set.
Revert HDD to
Rebuild Mirror Drive - Rebuild data, when RAID 1 or RAID 10 data mirroring is lost. Save And Exit Setup - Save all settings and exit the BIOS utility.
Exit Without Saving - Exit the BIOS utility without any saving.
Hard Disk Driver List
The menu shows the model number and capacities of the drives physically attached to the SATAII & PATA ports.
RAID Disk Driver List
The menu shows the current configuration of RAID set.