Nvidia MS-7374 manual Installing CPU Cooler Set, Hardware Setup, Fixed Lever

Hardware Setup

Installing CPU Cooler Set

W hen you are installing the CPU, make sure the CPU has a heat sink and a cooling fan attached on the top to prevent overheating. If you do not have the heat sink and cooling fan, contact your dealer to purchase and install them before turning on the computer.

Important

1.Read the CPU status in BIOS (Chapter 3).

2.Mainboard photos shown in this section are for demonstration of the CPU/ cooler installation only. The appearance of your mainboard may vary depend- ing on the model you purchase.

1.Position the cooling set onto the re- tention mechanism.

Hook one end of the clip to hook first.

2.Then press down the other end of the clip to fasten the cooling set on the top of the retention mechanism. Locate the Fix Lever and lift it up.

Fixed Lever

3. Fasten down the lever.

4.Attach the CPU fan cable to the CPU fan connector on the mainboard.

2-5