Configuration Settings
A profile is a set of
Service Set Identifier (SSID) is case sensitive.
1.Click the Configuration tab (see
Figure 4-3). In this tab, you can change the default configuration settings below.
2.To create a new profile, click the Profile box, and then type a name in the box.
3.Click the Create button.
4.To switch between profiles, click the Profile box, and then click the profile that you want.
5.Click the Activate button.
6.To remove a profile, click the Profile box, and then click the profile that you want.
7.Click the Remove button.
8.Click the Operating Mode box.
If you are connecting to a network through
an access point, click Infrastructure. | Figure |
If you are connecting to a network without |
|
an access point, click |
|
9.Click the Service Set Identifier (SSID) box.
In Infrastructure mode, set the SSID to the SSID of the access point.
In
10.Click the Transfer Rate box, and then click the transfer rate that you want.
11.Click the Channel box.
In Infrastructure mode, you need not set the channel. The channel for the access point is already set for you.
In
Configuring the Wireless LAN USB Adapter