Creative 2030 manual Network Configuration Windows

Network

Configuration in

Windows 2000

1.Start ->Settings ->Control Panel.

2.Double-click the Network icon.

3.Right-click the Local Area Connection icon and then click Properties from the list to select it.

4.When the dialog box similar to Figure 5-5appears, select Internet Protocol (TCP/ IP) and then click the Properties button.

Figure 5-5

5.When the dialog box similar to Figure 5-6appears, click the Obtain an IP address automatically option and proceed to step 7 If you are using a Dynamic IP Address. Continue with step 6 if you are using a static IP address.

6.Click the Use the following IP Address option to select it and type the relevant information in the IP Address, Subnet mask, Default gateway, Preferred DNS server and Alternate DNS server boxes.

7.Click the OK button.

8.When the Local Area Connection Properties dialog box appears, click the

OK button to complete the configuration.Figure 5-6

Configuring Your Computer’s Network Settings 5-5