Chapter 4. Application Configuration
Chapter 4
Application Configuration
There are three methods available for configuring the Express XR/XRT: Express Configuration Wizard, VT 100 terminal, or AT Commands.
Before configuring the Express XR/XRT for any application, the Express XR/XRT should be connected correctly for the applica- tion as described in the chapter Installation.
Some features in the Express XR/XRT do not take effect upon selection. This prevents unintentional reconfiguration of the Express XR/XRT during an active call. Items such as Bit Rate, Protocol, and Call Type take effect only at the beginning of a new call.
Technical notes, documents and scripts can be found on the ADTRAN web home page at http://www.adtran.com under the Information Desk. These provide information on how to use ADTRAN products in specific applications on PC and Macintosh platforms.
FACTORY DEFAULT CONFIGURATION
The Express XR/XRT is shipped configured as follows:
.................................................. Disabled | ||
Switch Type | National ISDN 1 | |
Call Type | Data 64K | |
Auto Answer | Enabled | |
Call Screening | Answer Any | |
Call Routing | Speech/Audio calls to POTS (XRT Only) | |
DTR Options | Ignore DTR | |
Flow Control | Hardware Flow | |
Protocol | Fallback | |
Express XR/XRT Quick Start Guide | 39 |