![](/images/new-backgrounds/1296452/29645277x1.webp)
Configuring a 20 Series CellPipe
Configuring the dnsrelay command
Select the setwanip command to set PVC and the IP address for routing.
>r1483> setwanip [<vpi>/]<vci> <wanip[/<masknum>]>
Select the show command to display the RFC1483 configuration.
> r1483> show
RFC1483 setting:
FUNCTION VPI/VCI | CLASS Wan IP/MaskNum |
Configuring the dnsrelay command
The following is a list of menus available under the dnsrelay command:
setdnsip | - | set DNS Server | IP |
show | - | show DNS Relay | configuration |
Select the setdnsip command to set the IP address of the DNS server.
>dnsrelay> setdnsip <dnsip> [<retry times>]
Select the show command to display the DNS Relay configuration.
>dnsrelay> show
DNS server ip: 192.168.2.65
Retry times: 3
DNS relay status
Configuring the ipoa command
The following is a list of menus available under the ipoa command>
delwanip | - delete IPoA PVC | ||
setqos | - set class | ||
setrip | - set IPoA | PVC | |
setwanip | - | set IPoA | PVC |
show | - | show IPoA configuration |
Select the delwanip command to delete one or all (8) IPoA PVCs.
>ipoa> delpvc <all>[<vpi>/]<vci>
CellPipe™ 20 Series User’s Guide |