Lucent Technologies 20 manual Configuring the r1483 command, R1483 command in bridging mode

Configuring a 20 Series CellPipe

Configuring the r1483 command

>>quick

R1483(r)/ IPoA(i)/ PPPoA(p): ipoa

0 PVC existed, 8 PVCs available.

Ethernet IP (149.198.65.46) :

Subnet mask (255.255.255.0) :

VPI(0-1023): 5

VCI(1-65535): 33

WAN IP : 148.198.6.46

Gateway : 148.198.6.90

>>quick

R1483(r)/ IPoA(i)/ PPPoA(p): pppoa

0 PVC existed, 1 PVC available.

Ethernet IP (149.198.65.46) :

Subnet mask (255.255.255.0) :

VPI(0-1023): 5

VCI(1-65535): 34

Authentication( PAP(p)/CHAP(c)/None(n) ): p

User name: Lucent

Password: *******

Retype password: *******

Configuring the r1483 command

You can configure the r1483 command for either bridging or routing mode.

The r1483 command in bridging mode

The following is a list of menus under the r1483 command in the bridging mode:

delpvc	- delete VPI		and VCI
pfilter	- set packet		filter type
setpvc	-	set VPI and VCI for bridge mode
setqos	-	set class

CellPipe™ 20 Series User’s Guide 4-11