| Configuring a 20 Series CellPipe |
| Configuring WAN interface |
|
|
coding | - <0><1><2><3><4><5><6><Auto> dB - coding gain |
counts | - display ADSL counters |
default | - reset to default ADSL setting |
ec_fdm | - <Ec><Fdm> - set EC or FDM mode |
rx_bin | - <start_bin> <end_bin> |
show | - display ADSL parameter configuration |
startup | - restart ADSL line |
status | - display ADSL line status |
stnl | - <T1.413><g.Lite><g.Dmt><Multi Mode> |
trellis | - <Enable><Disable> - Trellis encoding |
tx_pwr | - <0> .. <12> dB - Tx power attenuation |
tx_bin | - <start_bin> <end_bin> |
Select the abort command to abort the ADSL connection.
>adsl> abort
Abort ADSL connection
Select the bitdn command to obtain the downstream bit loading value.
>adsl> bitdn
Select the bitup command to obtain the upstream bit loading value.
>adsl> bitup
Select the coding command to set the ADSL coding gain:
>adsl> coding - <0><1><2><3><4><5><6><Auto> dB - coding
gain
Select the default command to set the ADSL configuration back to factory setting.
>adsl> default
Set ADSL configuration back to factory setting
Select the ec_fdm command to configure the ADSL link for echo cancellation or frequency division multiplexing (FDM).
>adsl> ec_fdm <Ec><Fdm>
CellPipe™ 20 Series User’s Guide |
