Configuring a 20 Series CellPipe
Configuring WAN interface
>sdsl> smbit <NormalReverse>
Select the status command to display the configuration and status of the current SDSL setting. For example:
>sdsl> status
>version : Ver 2.31 Date 19/Feb/2001
terminal | - cpe |
auto | - enable |
rate | - 2320 |
maxrate | - 2320 |
smbit | - reverse |
dbit | - normal |
scramble | - enabled |
cell | - disabled |
Status :
Bitpump F/W Version : 5.1
Bitpump : present
CO/RT Select : cpe
Auto Rate : enable
Current Rate : 272
Max Rate : 2320
Sign/Magnitude Bit Sequence : reverse
Data Bit Polarity : normal
DSL Status : during startup
Line Quality :
Attenuation : 31.5
Select the terminal command to configure the modem to COE or CPE mode.
>sdsl> terminal <Coe><CPe>
ADSL commands and configurations
The following is a list of the menus available under the adsl command:
abort | - abort ADSL line |
bitdn | - ADSL downstream bit loading value |
bitup | - ADSL upstream bit loading value |
CellPipe™ 20 Series User’s Guide |
