Lucent Technologies 20 manual Console setup

Setup

Console setup

Set your communications software to connect with the following settings:

•Connection—Specify a direct connection from the unit to the computer.

•Serial port—Specify the serial port on the computer the software is to use.

•Terminal type—Specify VT100.

•Duplex—Specify Full. This is the default for most communications software.

•Bits per second—Specify 9600.

•Data bits—Specify 8.

•Parity—Specify None.

•Stop bits—Specify 1.

•Flow control—Specify None.

A >> prompt appears when the connection is completed.

CellPipe™ 20 Series User’s Guide 2-5