Bridging commands
Table
Main menu | ||
|
|
|
sdsl | auto | - <Enable><Fast><Scan><Disable> |
| cell | - <Enable><Disable> |
| dbit | - configure the SDSL data bit as normal or reverse |
|
| polarity |
| default | - set SDSL configuration back to factory setting |
| enable | - activate the last updated SDSL parameters |
| maxrate | - configure the SDSL autobuad max rate |
| rate | - manually configure the SDSL line rate |
| scramble | - <Enable><Disable> payload scrambling |
| smbit | - configure sign/magnitude bit sequence |
| status | - display the configuration and status of current |
|
| SDSL setting |
| terminal | - configure modem to COE or CPE mode |
|
| |
default | set all configuration to factory setting | |
|
| |
lan | fullduplex - fullduplex <Disable><Enable> | |
| setip | - setup the IP address, and subnet mask for Ethernet |
|
| connection |
| show | - show LAN configuration |
|
| |
list | list status for enabled PVC | |
|
|
|
manage | setpass | - change password |
|
| |
mode | please select bridge or router:(b/r,b) | |
|
|
|
ping | ping IP |
|
|
| |
quick (for adsl) | R1483(r)/ IPoA(i)/ PPPoA(p) | |
|
| |
quick (for sdsl) | configure VPI/VCI | |
|
|
|
CellPipe™ 20 Series User’s Guide |
