Configuring a 20 Series CellPipe
Configuring LAN interface
fullduplex | - fullduplex <Disable><Enable> | |
setip | - | setup the IP address, and subnet mask for |
|
| Ethernet connection |
show | - | show LAN configuration |
Select the fullduplex command to enable or disable fullduplex.
>lan> fullduplex <Disable><Enable>
Select the setip command to set up the IP address and subnet mask for the LAN link. For example:
>lan> setip 192.168.2.32
Set a new IP address = 192.168.2.32 and
Subnet mask is default = 255.255.255.0
Select the show command to display the current configuration of IP setting. For example:
>lan> show
Ethernet IP = 192.168.2.32 and
Subnet mask is default = 255.255.255.0
FullDuplex : Disable
Configuring LAN interface in routing mode
The following is a list of the menus available under the lan command in routing mode:
dhcpclient | - set dhcp client configuration |
dhcpserver | - set dhcp server configuration |
fullduplex | - fullduplex <Disable><Enable> |
setdhcp | - set dhcp operation |
setip | - setup the IP address, and subnet mask for |
| Ethernet connection |
show | - show LAN configuration |
Select the dhcpclient command to set up the dhcp client configuration.
>lan> dhcpclient <lease time>
CellPipe™ 20 Series User’s Guide |
