Lucent Technologies 20 manual Main menu Second-level menus/description

Command-Line Interface

Bridging commands

save	- save and restart			modem
show	-	display	configuration of PVC and Ethernet
ver	-	display	software	version

Note: *The WAN interface displayed in the menu is dependent on the interface supported by your unit. This generic form of presentation has been arrived at to eliminate the need of representing every interface.

Table 3-1 lists the main menu commands and their corresponding second-level menus. The different WAN interfaces and their corresponding menus are presented in sequence. Select the interface and menus appropriate to your unit.

Table 3-1. Main menu and second-level bridging commands

Main menu	Second-level menus/description
adsl	abort	- abort ADSL line
	bitdn	- ADSL downstream bit loading value
	bitup	- ADSL upstream bit loading value
	coding	- <0><1><2><3><4><5><6><Auto> dB -
		coding gain
	counts	- display ADSL counters
	default	- reset to default ADSL setting
	ec_fdm	- <Ec><Fdm> - set EC or FDM mode
	rx_bin	- <start_bin> <end_bin>
	show	- display ADSL parameter configuration
	startup	- restart ADSL line
	status	- display ADSL line status
	stnl	- <T1.413><g.Lite><g.Dmt><Multi Mode>
	trellis	- <Enable><Disable> - Trellis encoding
	tx_pwr	- <0> .. <12> dB - Tx power attenuation
	tx_bin	- <start_bin> <end_bin>

3-4 CellPipe™ 20 Series User’s Guide