Runco SP-60xa, SP-42xa, SP-50xa manual Option Menu Commands, Average, Auto

Serial Communications

Table 6-1. Serial Commands (continued)

	Command			Value Range		Description
ASCII			HEX	Minimum	Maximum
SFTS06		53 46 54 53 30 36		–	–	Sets the SIGNAL FORMAT to Type6.
SFTS07		53 46 54 53 30 37		–	–	Sets the SIGNAL FORMAT to Type7.
SFTS08		53 46 54 53 30 38		–	–	Sets the SIGNAL FORMAT to Type8.
SFTS10		53 46 54 53 31 30		–	–	Sets the SIGNAL FORMAT to Type10.
				OPTION Menu Commands
ESVS00		45 53 56 53 30 30		–	–	Sets the ENERGY MODE setting to
						AVERAGE.
ESVS01		45	53 56 53 30 31	–	–	Sets the ENERGY MODE setting to
						LEVEL1 (energy saving).
ESVS02		45	53 56 53 30 32	–	–	Sets the ENERGY MODE setting to
						LEVEL2 (fixed brightness).
ESVS03		45	53 56 53 30 33	–	–	Sets the ENERGY MODE setting to
						LEVEL3 (long life).
ESVS04		45	53 56 53 30 34	–	–	Sets the ENERGY MODE setting to
						AUTO.
ORBS00		4F	52 42 53 30 30	–	–	Turns ORBITER OFF.
ORBS01		4F	52 42 53 30 31	–	–	Sets ORBITER to TYPE 1.
ORBS02		4F	52 42 53 30 32	–	–	Sets ORBITER to TYPE 2.
ORBS03		4F	52 42 53 30 33	–	–	Sets ORBITER to TYPE 3.
SOFS00		53	4F 46 53 30 30	–	–	Turns SOFTEN OFF.
SOFS01		53	4F 46 53 30 31	–	–	Sets SOFTEN to 1.
SOFS02		53	4F 46 53 30 32	–	–	Sets SOFTEN to 2.
SOFS03		53	4F 46 53 30 33	–	–	Sets SOFTEN to 3.
SSTS00		53 53 54 53 30 30		–	–	Sets STILL IMAGE FREEZE to OFF (still
						image fills screen).
SSTS01		53 53 54 53 30 31		–	–	Sets STILL IMAGE FREEZE to
						SIDE-BY-SIDE (still image next to mov-
						ing image).
SSTS02		53 53 54 53 30 32		–	–	Sets STILL IMAGE FREEZE to PinP (still
						image in sub-screen with moving
						image).
TPH		54	50 48	000	023	Sets the hour of the present time.

Notes:

1. When making input-specific adjustments such as to image quality, screen position/size or audio sub-volume, select the input you wish to affect before making such adjustments.

2. These settings are not stored in memory.

Runco CinemaWall SP Series Owner’s Operating Manual 59