Runco SP-42xa, SP-50xa, SP-60xa 4.7 Using the On-Screen Menus

Operation

32 Runco CinemaWall SP Series Owner’s Operating Manual

PRELIMINARY

4.7 Using the On-Screen Menus

To use the on-screen menus:

1. Press MENU on either the remote control or the CinemaWall control panel (see Figure

2-1) to display the Main Menu. Or, using a straightened paper clip or similar object,

press the Installer Adjust menu button located below the Input 4 button on the remote

control (see Figure 2-5) to display the Installer Adjust menu.

2. To select a sub-menu, use the right- or left-arrow buttons ( , ) to highlight it.

3. Use the up- or down-arrow buttons ( , ) to select the setting you want to change.

4. Do one of the following:

Press SET repeatedly until the desired value appears;

– OR –

Press SET to display an on-screen slidebar or sub-menu. Press the right- or left-arrow

button ( , ) to change that setting. (If you do not do this within five seconds, the

slidebar disappears.) Press SET to confirm the setting.

5. If the current menu has a “RETURN” command, highlight it and press SET to return to

the previous menu. Or, press MENU to exit the OSD menu system.

The CinemaWall OSD menus are arranged hierarchically, as shown in Figure 4-2.

Depending on the selected input source and signal characteristics, some menu options

may not be available.

The Installer Adjust menu is intended for use by authorized,

trained service personnel only.

Note

Contents

Main Page THREE YEAR LIMITED WARRANTY For Plasma Displays Page RUNCO VIDEO-PRODUCT INFORMATION RETAIN THIS INFORMATION FOR YOUR RECORDS Safety Precautions Page Page Page Page 1.1 About This Manual 1. Introduction 1.2 Using This Manual Caution DANGER! 1.3 Description, Features and Benefits Page 2.1 CinemaWall at a Glance 2. Controls and Functions Page Controls and Functions Runco CinemaWall SP Series Owners Operating Manual 7 14 15 16 17 12 13 Figure 2-2. SP-42 Connector Panel Controls and Functions 16 910 11 12 13 14 15 1 2 3 4 5 6 7 8 Figure 2-3. SP-50 Connector Panel Figure 2-4. SP-60 Connector Panel 17 910 11 12 13 14 15 123 4 5 6 7 8 Page Page Page Page 3.1 Remote Control 3. Installation Page 3.2 Quick Setup Table 3-1. Installation Overview 3.3 Installation Considerations Page Page 3.4 Connections to the Page Page Page Page Page Page Page 4.1 Turning on the Power 4.2 Changing the OSD Language 4. Operation 4.3 Selecting an Input Source 4.4 Viewing Input Signal Information 4.5 Setting the Computer Display Properties 4.6 Changing the Aspect Ratio Table 4-1. Aspect Ratio Settings Table 4-1. Aspect Ratio Settings (continued) 1280x720 Image within 1365x768 Display 4.7 Using the On-Screen Menus Operation Figure 4-2. CinemaWall OSD Menu Structure Option Set-Up Runco CinemaWall SP Series Owners Operating Manual 33 Picture (Note 1) Below Black bove Black A Page Page Page Page Table 4-2. Power Management Indications Page Page Page Page Page Page Caution 4.8 Using Picture-In-Picture (PIP) 2. Press the ( Page 4.9 Enlarging One Part of the Screen Page 5.1 Cleaning 5.2 Troubleshooting Tips 5. Maintenance and Troubleshooting Table 5-1. Troubleshooting Chart Space Computer/Video Signal Compatibility Table 5-1. Troubleshooting Chart (continued) 6.1 RS-232 Connection and Port Configuration 6.2 Serial Command Syntax 6. Serial Communications Table 6-1. Serial Commands Page Page Page Page Page Page Page Page Page Page 7.1 CinemaWall Specifications Table 7-1 lists the CinemaWall specifications. 7. Specifications Table 7-1. CinemaWall Specifications Table 7-1. CinemaWall Specifications (continued) Runco CinemaWall SP Series Owners Operating Manual 67 7.2 CinemaWall Dimensions Figure 7-1. CinemaWall Model SP-42 Dimensions (with Optional Table Stand) Figure 7-2. CinemaWall Model SP-50 Dimensions (with Optional Table Stand) 68 Runco CinemaWall SP Series Owners Operating Manual Figure 7-3. CinemaWall Model SP-60 Dimensions (with Optional Table Stand) Runco CinemaWall SP Series Owners Operating Manual 69 7.3 Computer/Video Signal Compatibility Table 7-2. Computer/Video Signal Compatibility Chart Table 7-2. Computer/Video Signal Compatibility Chart (continued)