Runco SP-42xa, SP-50xa, SP-60xa Caution

Operation

46 Runco CinemaWall SP Series Owner’s Operating Manual

PRELIMINARY

CinemaWall inputs using the SWAP button on the remote control. To enable it, select

Seamless Switch from the Option menu and set it to ON. Then, specify the two inputs

you want to associate with this feature in the SELECT1 and SELECT2 fields.

By default, Input 1 and Input 2 are selected, so that when Input 1 is active, pressing

SWAP switches to Input 2 and vice versa.

Select Return to exit the Seamless Switch menu.

Picture Orient.: Select Picture Orient. to change the displayed image orientation to suit

the installation method; see Figure 4-8. For example, if the CinemaWall is suspended from

a ceiling, you may want to mount it upside down and run the cables upward (toward the

ceiling) to make them less visible. In this case, you would select “FLIP HV.”

Figure 4-8. Picture Orientation

Function Reset: To restore the CinemaWall to its factory-default state, select Function

Reset from the Option menu. Then, press to highlight YES and press SET. This action

resets ALL settings (except the display ID Number) to their default values, as set at the

factory.

Seamless Switch is not available when using PIP.

This action is not undoable. Proceed with caution!

Note

Up-down reversal

Normal operating state Left-right reversal

Up-down, left-right reversal

OFF FLIP H

FLIP HV FLIP V

Caution

Contents

Main Page THREE YEAR LIMITED WARRANTY For Plasma Displays Page RUNCO VIDEO-PRODUCT INFORMATION RETAIN THIS INFORMATION FOR YOUR RECORDS Safety Precautions Page Page Page Page 1.1 About This Manual 1. Introduction 1.2 Using This Manual Caution DANGER! 1.3 Description, Features and Benefits Page 2.1 CinemaWall at a Glance 2. Controls and Functions Page Controls and Functions Runco CinemaWall SP Series Owners Operating Manual 7 14 15 16 17 12 13 Figure 2-2. SP-42 Connector Panel Controls and Functions 16 910 11 12 13 14 15 1 2 3 4 5 6 7 8 Figure 2-3. SP-50 Connector Panel Figure 2-4. SP-60 Connector Panel 17 910 11 12 13 14 15 123 4 5 6 7 8 Page Page Page Page 3.1 Remote Control 3. Installation Page 3.2 Quick Setup Table 3-1. Installation Overview 3.3 Installation Considerations Page Page 3.4 Connections to the Page Page Page Page Page Page Page 4.1 Turning on the Power 4.2 Changing the OSD Language 4. Operation 4.3 Selecting an Input Source 4.4 Viewing Input Signal Information 4.5 Setting the Computer Display Properties 4.6 Changing the Aspect Ratio Table 4-1. Aspect Ratio Settings Table 4-1. Aspect Ratio Settings (continued) 1280x720 Image within 1365x768 Display 4.7 Using the On-Screen Menus Operation Figure 4-2. CinemaWall OSD Menu Structure Option Set-Up Runco CinemaWall SP Series Owners Operating Manual 33 Picture (Note 1) Below Black bove Black A Page Page Page Page Table 4-2. Power Management Indications Page Page Page Page Page Page Caution 4.8 Using Picture-In-Picture (PIP) 2. Press the ( Page 4.9 Enlarging One Part of the Screen Page 5.1 Cleaning 5.2 Troubleshooting Tips 5. Maintenance and Troubleshooting Table 5-1. Troubleshooting Chart Space Computer/Video Signal Compatibility Table 5-1. Troubleshooting Chart (continued) 6.1 RS-232 Connection and Port Configuration 6.2 Serial Command Syntax 6. Serial Communications Table 6-1. Serial Commands Page Page Page Page Page Page Page Page Page Page 7.1 CinemaWall Specifications Table 7-1 lists the CinemaWall specifications. 7. Specifications Table 7-1. CinemaWall Specifications Table 7-1. CinemaWall Specifications (continued) Runco CinemaWall SP Series Owners Operating Manual 67 7.2 CinemaWall Dimensions Figure 7-1. CinemaWall Model SP-42 Dimensions (with Optional Table Stand) Figure 7-2. CinemaWall Model SP-50 Dimensions (with Optional Table Stand) 68 Runco CinemaWall SP Series Owners Operating Manual Figure 7-3. CinemaWall Model SP-60 Dimensions (with Optional Table Stand) Runco CinemaWall SP Series Owners Operating Manual 69 7.3 Computer/Video Signal Compatibility Table 7-2. Computer/Video Signal Compatibility Chart Table 7-2. Computer/Video Signal Compatibility Chart (continued)