How to use the USB terminal

This projector can connect with a commercial USB memory and a USB memory card reader/writer that are USB2.0 compliant, a digital camera or the like and display the JPEG and MPEG files saved in those devices. p.49

(Toshiba does not guarantee the operation of all USB 2.0-compliant devices.) To connect or disconnect a USB device, use the following procedure:

N Connecting USB device

Plug the USB device.

Make sure the orientation is correct then plug the USB device in until it stays securely.

USB device

N Disconnecting USB device

1Switch the input to USB memory and press the MENU button twice to display the Setting display (2), then select and run Unplug device in the Slideshow setting menu.

The processing for disconnecting a USB device starts.

2The message “This USB device can be unplugged safely” appears on the screen.

3Unplug the USB device.

Be sure to perform the above operations. Disconnecting a USB during operation may cause a malfunction or data corruption.

Notes

A USB device can be plugged even when the power is on.

The projector may not recognize a supported USB device. In such a case, unplug the USB device then re-plug it.

The USB terminal does not support the supplied mouse remote control receiver or a commercial mouse controller.

A USB hub is also not supported.

Precaution

Disconnecting the power plug while the USB device is operating may cause a malfunction or data corruption.

N USB memories

This projector can read JPEG, MPEG1, and MPEG2 (PS) files stored in a USB memory and display them on the screen.

This allows you to give presentations without a computer, create an advertising screen board using the slideshow function, and more. (The projector cannot reproduce animation effects such as those produced by Microsoft® PowerPoint®.)

L The USB terminal

The USB terminal of the projector is USB2.0 compliant and can connect with a USB memory, a USB memory card reader/writer, a digital camera and the like.

L USB devices whose operation has been verified

Toshiba does not guarantee the operation of all USB devices.

Toshiba USB memory

: U2E series (256MB, 512MB, 2GB)

Toshiba USB memory

: U2G series (16GB)

SanDiskUSB memory

: SDCZ4 series (1GB, 2GB)

SanDiskUSB memory

: SDCZ6 series (1GB, 4GB)

SanDiskUSB memory

: SDCZ7 series (1GB, 2GB)

Toshiba USB card R/W : IPCS078A

SanDiskUSB card R/W : SDDR-88-J70

Note that this projector does not support all USB memories, USB card readers/writers, and digital cameras.

N Backing up data

Toshiba recommends that you back up the data saved in the USB memory onto your computer and the like before use. (Toshiba assumes no liability for losses incurred by data lost through the use of this projector.)

N Supported files

(1)Supported file extensions are .jpg, .JPG, .jpeg, .JPEG, .mpg, .MPG, .mpeg, and

.MPEG.

(2)The maximum number including both folders and files is 512.

(3)Some JPEG and MPEG files are not supported by this projector.

Regarding JPEG files, the limitations in (3) above can be alleviated by converting the JPEG file with the supplied JPEG Conversion Tool p.78 software application.

Operations

48

49

Page 25
Image 25
Toshiba TDP-EX20 owner manual How to use the USB terminal