Using the Network Utility (Continued)
•To transmit sound, press the 
button then launch the application that plays the contents including the sound. When you operate the projector using Windows Vista™, “Switching audio play device” window will be displayed after pressing the start button of Network Utility. Follow the instruction to switch the audio play device, and then launch the application that plays the contents including sounds.
•If no sound can be heard from the computer though the connection is stopped, re- launch the application that plays the contents including the sound.
•Transmission may not be available depending on the sound type.
•Sound cannot be transmitted if multiple projectors are selected.
•The audio signals transmitted by a computer become mono.
N Displaying a JPEG image saved on a computer via the projector
1Launch the Network Utility software application.
The Screen Image transmission mode window appears on the computer’s screen.
2 Click on the JPEG File icon 
.
The Network Utility window changes to JPEG File transmission mode.
3Click on the Browse button, and select the file to send.
Clicking on the Browse button displays the Open dialog box. Select the file to send, then click on the Open button.
The selected file is added to the
4Select the file to be sent from the
Click on the Transmission File field’s 
button to display the
A thumbnail of the selected file appears in the Preview box. The file displayed here will be transmitted.
Step 3 can be skipped.
The way that drag and drop the file to be sent from the desktop or Windows Explorer into the Preview box is also available. In this case as well, the selected file is added to the file
5Select the projector to be transmitted.
The IDs of projectors accessible for transmission will be listed. (If projector name has been set up already, it is shown instead of the MAC address.) Select the checkbox of the projector
to be transmitted to from this list. Then icon 
is displayed on the projector’s screen for few seconds.
It is possible to select
6Click on the 
button.
The selected file’s image is displayed by the projector.
| Notes | ||||
| Only one file can be sent at a time. To send another file, repeat steps |
| and |
| . |
• | 4 | 6 | |||
• | Selecting a file by drag and drop may not be available with Windows Vista™. | ||||
N Displaying a video file saved on a computer via the projector
1Launch the Network Utility software application.
The Screen Image transmission mode window appears on the computer's screen.
2Click on the 
icon.
The Network Utility window changes to Movie
File transmission mode.
3Click on the Advanced button.
The Movie file: Advanced Settings dialog appears. Set the dialog as shown below, as necessary.
•Interruption
Check the No Interruptions checkbox to prevent other computers from interrupting the projector, for example, during presentation.
•Transmission Mode (Sound)
Check the Transmit sound to a projector (Only when connected with one projector) checkbox to transmit the sound being played on a computer to the projector.
Operations
66 | 67 |
