Using the Network Utility (Continued)
2) Modifying the computer settings using the projector settings
• Setting on the projector
1Turn the projector power on.
2Switch the input to Network.
3Press the MENU button twice, then select Easy Connect (USB memory) in Network Utility settings from the Setting display (2) menu and press the 
button.
4When a confirmation window appears, insert the USB memory into the projector.
5Click Yes then press the 
button.
The wireless LAN settings are saved to the USB memory. When successfully saved, a message appears.
6Unplug the USB memory.
•Setting on the projector
7Launch the Network Utility software
application.
8Insert the USB memory into the computer.
9After a confirmation message appears, make settings.
10When the setting is complete, the projector name of the connected projector or the projector ID (MAC address of wired LAN) is displayed.
Note
•This operation is allowed only when the Transmission mode is set to Ad hoc in the projector’s wireless LAN settings. Be sure to use Network Utility version 5.0.
L Profile settings
This feature allows the user to save the computer’s wireless LAN settings.
This feature is useful when you need to change wireless LAN settings according to where you use.
L Advanced setting
This feature allows the user to set details for Easy Connect settings. Make the following settings as required in this dialog.
•Registering profile automatically
Check this checkbox to automatically register the settings of the Easy Connect as profile setting data.
•Switching settings automatically at start-up
Check this checkbox to automatically switch to the last used wireless LAN settings when launching the Network Utility.
L WEB browser
Where the computer and the projector are connected over the network, bring up the window of Projector Configuration Tool by pressing the WEB browser button.
Precautions
•If the page is not displayed correctly,
•When the network settings are changed, the network connection is disconnected. If you wish to reconnect, set up the computer again.
Precaution
•The simple 1:1 connection, the USB memory connection and the profile setting may not work normally depending on the type of the wireless LAN adapter and the wireless LAN embedded computer. When such a case arises, use the Network Utility menu to make necessary wireless LAN settings manually.
Operations
72 | 73 |
