Operations
Turning the power on and off
N Connecting the power cord
1Insert the power cord connector into the AC IN socket of the projector.
2Insert the power cord plug into a wall or other power outlet.
N Turning the power on
1Open the lens cover.
Power cord connector (Supplied)
Notes
• The |
before this by performing any operation. You can also configure the |
to appear via the Display setting menu p.40 . |
• The first time you use the projector after purchase, after the |
the start menu is displayed p.28 . |
• When [Key lock] is [On], the operation buttons of the projector do not work p.45 . |
• When [Password] is [On], enter password then the |
Password entry screen disappears p.35 . |
• Do not touch the lens directly with your hand. |
If fingerprints or stains are left on the projection lens surface, they may interfere with the |
projector’s ability to project images on the screen. |
• If the lens cover is closed while in use, after a moment the power will turn off, then the |
Slide the lens cover to open. If it is left closed, the power will not be turned on.
2 Turn on the main power switch.
The ON/STANDBY indicator will change to orange, indicating standby mode.
3 Press the ON/STANDBY button. | Control panel | Remote |
The power is turned on, and the ON/STANDBY |
| control |
|
| |
indicator lights in green. After a moment, the |
|
|
screen appears. |
|
|
CAUTION
•Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyesight.
•Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
•Do not place your hands, face, or other objects near the air exhaust, the lamp cover or the bottom of the unit. Doing so could cause burns, deform/break the object.
projector goes into standby mode. |
N Turning the power off
1Press the ON/STANDBY button.
A message appears on the screen, confirming that you wish to shut off the power. This message will disappear after a moment. (This operation is no longer valid after the message disappears.)
2Press the ON/STANDBY button again.
When the setting of beep sound is [On], the projector beeps, and the screen disappears, but the internal cooling fan continues to operate. Then, the projector goes into standby mode.
During cooling, the ON/STANDBY indicator flashes. While the
indicator is flashing, the power can not be turned back on. At this
point of time, it does not matter even if you unplug the power cord.
3Close the lens cover.
After use, close the lens cover.
Note
•The projector consumes about 10W of power in standby. We recommend that you unplug the power cord if you will not be using the projector for an extended period.
Precaution
•If the power cord is unplugged before cooling is complete or the main power is turned off, give the lamp time (about 5 minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light.
Operations
26 | 27 |
