IMPORTANT SAFETY INSTRUCTIONS (Continued)
20.If glass components, including lens and lamp, should break, contact your
dealer for repair service.
This product incorporates glass components, including a lens and a lamp. If such parts should break, please handle with care to avoid injury and contact your dealer for repair service. The broken pieces of glass may cause to injury. In the unlikely event of the lamp rupturing, thoroughly clean the area around the projector and discard any edible items placed in that area.
21. Servicing
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
23. Safety Check
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
24.Do not leave thermal- paper documents or easily deformed items on top
of the unit or near the air exhaust for long periods of
time.
The heat from the unit could erase the information on the thermal paper, or cause deformation or warping.
27.When using a wireless LAN function:
•Do not use near people with heart pacemakers.
•Do not use near electronic medical equipment, or in hospitals or other medical institutions.
•Do not use inside aircraft or in places where the wireless LAN function could interfere with
electromagnetic signals.
The electromagnetic interference could cause a malfunction, resulting in an accident.
28.If the use of a wireless LAN function interferes with another device’s electromagnetic signals,
Before Using
22. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other hazards.
(Replacement of the lamp only should be made by users.)
25. Do not use the product in a closed installation state.
Do not place the product in a box or in any other closed installation state. Otherwise it may overheat. This could result in a risk of fire.
26.Do not look into the laser light source of the remote control or direct the laser pointer toward a person or
a mirror.
The laser beam may cause damage to the eyesight.
cease use immediately.
The electromagnetic interference could cause a malfunction, resulting in an accident.
8 | 9 |
