POWER SUPPLY INFORMATION
If your line voltage is 220 to 240V, use one of the following types of cable/plug.
IMPORTANT PRECAUTIONS (Continued)
Avoid Volatile Liquid
Plug |
|
configuration Plug type | Line voltage |
EURO | 220 – 240V |
UK | 220 – 240V |
Use a 5A fuse which is approved by ASTA or BSI to BSI362.
Always replace the fuse cover after changing the fuse.
Plug |
|
configuration Plug type | Line voltage |
Australian | 200 – 240V |
240V |
|
10A |
|
Switzerland | 200 – 240V |
240V |
|
6A |
|
North American | 200 – 240V |
240V |
|
15A |
|
Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products touching the unit for a long time. They will leave marks on the finish. Do not use a chemically saturated cloth.
EXEMPTION CLAUSES
• Toshiba Corporation bears no responsibility in the case of damages arising from natural |
disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation, acts |
by third parties, other accidents, or use under abnormal conditions including erroneous or |
improper operation and other problems. |
• Toshiba Corporation bears no responsibility for incidental damages (lost profit, work |
interruption, corruption or loss of the memory contents, etc.) arising from the use of or the |
inability to use this unit. |
Before Using
IMPORTANT PRECAUTIONS
Moisture Condensation
Never operate this unit immediately after moving it from a cold location to a warm location. When the unit is exposed to such a change in temperature, moisture may condense on the lens and the crucial internal parts. To prevent the unit from possible damage, do not use the unit for at least 2 hours when there is an extreme or sudden change in temperature.
Place and Manner of Installation
•Do not place in hot locations, such as near heating equipment. Doing so could cause malfunction, and shorten the life of the projector.
•Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts, shortening their lives, and darkening the screen.
•Do not use this product in the upright position or tilt it up or down by more than 20° from level. Doing so may cause a failure or shorten the life of the product.
•Using this instrument near a TV or radio may cause interference to the images or audio sound. If this happens, move it away from the TV or radio.
•In a high altitude location where air is thin, cooling efficiency is reduced so use the projector with [Fan mode] set to [High]. p.44
•Only plug the power cord into outlets rated for use with the power cord’s specified voltage range. Do not overload extension cords or table taps as this can result in fire or electric shock.
•Route the power cable or the connecting cable away from where people could trip over it. The projector may fall down, which could result in severe injury.
•Be sure the power cord is easily reached for unplugging in case of emergency. Do not place any obstacles near a wall outlet in which the cord is plugged.
• Toshiba Corporation accepts no liability whatsoever for any damages arising from not |
having followed the descriptions in this Instruction Manual. |
• Toshiba Corporation accepts no liability whatsoever for any damages arising from |
malfunctions arising from combination with equipment or software that is not related to |
Toshiba Corporation. |
• Toshiba bears no responsibility for information being intercepted or leaked due to the use |
of a wireless LAN, or any damages therefore. |
In the spaces provided below, record the Model and Serial No. located at the bottom of
your projector. |
|
Model No. | Serial No. |
Retain this information for future reference.
10 | 11 |
