Using the Network Utility (Continued)
N Operating the projector
This function can be used with any projector input.
1Launch the Network Utility software application.
The Screen Image transmission mode window appears on the computer’s screen.
2Click on the Remote Control button.
The Remote Control window appears.
As the Network Utility window is still displayed, you can operate the projector via the Remote Control window, while using the Network Utility’s functions.
While it is possible to use this function merely to operate the projector, closing the Network Utility also closes the Remote Control window.
3Select the projector to be operated.
In the Remote Control window, click on the 
button, and select the desired projector from the
Only one projector can be selected. (It is not possible to operate multiple projectors.)
4Click on the Remote Control window’s buttons.
The function of each button and box is as follows:
Power On: | Turns projector power on. |
Power Off: | Turns projector power off. |
Projecting images stored in a USB memory
N Playing a slide show from a thumbnail list
With Auto. demo set to Off in “Setting slideshow options”, data readout begins when a USB memory is inserted and the input switches to USB memory. A list of thumbnails will then appear on the screen.
The figure below is an example of this process:
| Thumbnail list number |
Current Folder Name | Current list No./Total number of lists |
|
Current File Name
Operation Guide
Previous page exists
Orange frame: currently selected file or folder
Folder
Thumbnail image of first file in folder
JPEG file | MPEG file |
Thumbnail image of file
Next page exists
Symbols in the thumbnail list
Operations
Freeze: | The picture is paused. | |
Input (box): | Click on the | button, and select the desired input from the |
| list. |
|
Go: | Switches to the input selected in the Input box. | |
Mute: | Cuts off picture and sound. Click again to restore picture and sound. | |
Volume | Adjust sound volume. | |
Resize Off | Restores the picture to its original size. | |
Resize | Adjusts the enlargement ratio. | |
:Move screen (up/down/left/right/diagonal)
5To quit, click on the 
button on the Remote Control window.
Performing this does not close the Network Utility window.
To exit both the Network Utility and the Remote Control, click on the 
button on the Network Utility window.
Indicates that only folders are inside the folder.
Indicates that the JPEG, MPEG or other file is not supported.
When the Thumbnail display is set to Off, the screen appears like this.
Indicates that there is no data to be displayed in the folder.
Indicates that an unsupported JPEG, MPEG or other file is present.
74 | 75 |
