Using the Network Utility (Continued)
N Easy Connect utility
This feature allows users to easily connect the projector to a computer over wireless
networks, without making Wireless LAN settings via Network Utility.
Launch the Network Utility software application and click the Tool button 
to bring up the Wireless LAN Settings Utility dialog box. Select a desired connection mode in this dialog box.
L How to set up a simple 1:1 connection
• Setting on the projector
1Turn the projector power on.
2Switch the input to Network.
3Press the 
button on the projector control panel.
•Setting on the computer
4Launch the Network Utility software application.
When the Network Utility launches, the Screen Image transmission mode window appears on the computer screen.
5Click the Tool button 
.
The Wireless LAN Settings Utility dialog box appears.
6Select Simple 1:1 connection then
click OK.
The connection starts up.
When a connection confirmation message appears, proceed as instructed in the message.
7When the connection is complete, the computer screen image is transmitted.
If the transmission does not start, uncheck the Confirm and immediately transmit screen image checkbox.
L How to connect USB memory
Set up wireless LAN using a commercial USB memory. See p.49 for available USB memories.
1) Copying the computer settings to the projector
•Setting on the computer
1 Insert the USB memory into the USB terminal slot on the computer.
2Click the Tool button 
of the Network Utility to bring up the Wireless LAN Settings Utility dialog box. Select USB memory connection and click OK.
The dialog box for USB memory connection appears.
3Select [Projector settings] and click OK,
then enter the required setting items and click OK.
The setting information is saved to the USB memory.
4Unplug the USB memory from the computer.
To unplug the USB memory, follow the instructions in the user’s manual supplied with the USB memory or the computer.
•Setting on the projector
5Turn the projector power on.
6Switch the input to Network.
7Insert the USB memory into the projector.
A message appears, notifying that the projector settings have been changed.
Operations
Notes
•This operation is allowed only when the Transmission mode is set to Ad hoc in the projector’s wireless LAN settings.
•The operation procedure of the projector setting and the computer setting can be altered without affecting the connection setup, assuming the operation on each side is complete within 60 seconds.
•Be sure to use Network Utility version 5.0.
8The projector name or the projector ID (MAC address of wired LAN) will be displayed on the computer’s screen.
70 | 71 |
