Toshiba TDP-EX20 owner manual Connection, Before connection

Connection

Before connection

•Read the owner’s manual of the device you are connecting to the projector.

•Some types of computer cannot be used or connected to this projector. Check for an RGB output terminal, supported signal p.94 , etc.

•Turn off the power of both devices before connecting.

•The figure is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

	Computer	Computer
	(for control)			Computer	Video recorder, etc.
					To audio	To video
					output	output
	p.96				White (L)/	AV cable
To				To audio	To RGB Red (R)
						(not supplied)
RS-232C		To RGB	To audio	output	output
terminal		output	output		RGB cable
	Control cable	RGB cable	Audio cable	Audio cable
					(not supplied)
		(supplied)	(not supplied) (not supplied)

				S-video cable
Audio cable				(not supplied)
		Monitor cable	Audio cable
(not supplied)
		Mini D-sub	(not supplied)
		15P-BNC
Audio cable		(not supplied)
			To Y/CB/CR
(not supplied)				To audio
			output
				output
			Green (Y)/Blue
				White (L)/
			(CB)/Red (CR)
To audio input	To audio			Red (R)
			Conversion adapter		To S-video
White (L)/Red (R)
	output		BNC-pin (not supplied)		output
Audio amplifier, etc.		DVD video recorder, etc.		Video recorder,
				DVD player, etc.

Notes

•The COMPUTER 1 IN terminal functions identically to the COMPUTER 2 IN terminal.

•The MONITOR OUT terminal outputs signals from the COMPUTER 1 IN terminal or the COMPUTER 2 IN terminal, or outputs Y/PB/PR signals as selected with the INPUT button. If no input is selected, the MONITOR OUT terminal outputs the input signals last selected for each input terminal.

•Signals are output from MONITOR OUT terminal even in standby mode. However, from AUDIO OUT terminal, no audio signal is output.

•A computer monitor cannot accept Y/PB/PR signals correctly.

•The AUDIO IN terminal doubles for devices connected to COMPUTER terminals 1 and 2.

•When an AUDIO OUT terminal is connected, sound is not output from the projector speaker.

•Output volume of AUDIO OUT terminal can be adjusted by the VOL button.

•Moving pictures played back on computers using DVD software may appear unnatural if it is projected with this projector, but it is not a malfunction.

Preparations

24 25