Nextel comm IR1200 manual Dial

iR1200 Modem

Values:

1 = Enabled command mode character echo.

Dial

This command instructs the DCE to originate a call. When the DCE receives the dial string from the computer, all non-numeric characters in the Dial String that are not recognized dial-modifiers are ignored. This allows the DTE to request modem numbers containing unsupported dial modifiers, hyphens, parenthesis, and other punctuation.

Command	D
Action	ATd <Dial String>
Query
Range
Parameter	Dial string contains a modem number to be dialed,
Values	translated into an array of ASCII characters between 0
(dial	and 9 inclusive
modifiers)	T = Allowed, but ignored by the modem.
:
	P = Allowed, but ignored by the modem.
	! = Hook Flash (1/2 second).
	W = Wait for time specified in S7 for dial tone.
	(blank) = Wait for time specified in S7 for one or more
	rings followed by five seconds of silence before
	continuing execution of dial string.
	, = Pause for time specified in S8
	; = After dialing return to command mode.

68 nextel.com