Multitech MT5600ZDXV manual S10, S11, S12, S18

Models MT5600ZDX & ZDXV
S6	seconds		2–255	2		Sets the time the modem waits
						after it goes off-hook before it
						begins to dial the telephone num-
						ber.
S7	seconds		1–255	50		Sets the time the modem waits
						for a carrier signal before abort-
						ing a call. Also sets the wait for
						silence time for the @ dial mod-
						ifier.
Register	Unit		Range	Default		Description
S8	seconds		0–255	2		Sets the length of a pause caused
						by a comma character in a dialing
						command.
S9	1/10	sec	0–255	6	(0.6)	Sets the time, in tenths of a
						second, that the carrier must be
						present before the modem con-
						siders it valid and turns on the
						RLSD.
S10	1/10	sec	1–255	14	(1.4)	Sets the time, in tenths of a
						second, that a carrier signal must
						be lost before the modem discon-
						nects.
S11	1 ms		50–255	95		Sets spacing and duration of dial-
						ing tones.
S12	1/50	sec	50–255	50 (1sec) Defines the maximum period, in
						fiftieths of second, allowed be-
						tween receipt of the last charac-
						ter of the three escape charac-
						ter sequence from the DTE (es-
						cape code guard time).
S18	decimal		0–255	0		Sets the length of time, in sec-
						onds, that the modem conducts
						a test (commanded by &Tn)
						before returning to the com-
						mand mode. If this register value
						is zero, the test will not automat-
						ically terminate; the test must be
						terminated	from the command
						mode by issuing and &T0 or H
						command.	When S18 is non-

54