Multitech MT5600ZDXV manual Command En MNP 10 Compromise Equalizer Enable Command

		User Guide
Command: :En	MNP 10 Compromise Equalizer Enable Command
Values:	n = 0 or 1
Default:	n/a
Description:	:E0	n/a
	:E1	n/a

∗This command is included only for compatibility and performs no function.

Command: *B	View Numbers in Blacklist
Values:	n/a
Description:	This command requests the modem to return a list of
	blacklisted numbers to the DTE.		Permanently
	forbidden numbers as defined by country require-
	ments will not appear on this list. If no numbers are
	blacklisted, only the OK result code is issued. The
	format of the response is shown by the example
	below:
	No. -- Phone Number
	1;	6127853500
	2;	2154778767
	3;	2128724549

Command: *D	View Delayed Numbers
Values:	n/a
Description:	This command causes the modem to send a list of the
	delayed numbers together with the delay associated
	with each. The modem will return a list of delayed
	telephone numbers as defined in the *B command. If
	no numbers are delayed, only the OK result code is
	issued. The format of the response is shown by the
	example below (delay times are shown
	as:hours:minutes:seconds):
	No. -- Phone Number--Delay
	1;	6127853500	1:59:25
	2;	2154778767	0:4:43
	3;	2128724549	2:33:00

51