Grandstream Networks 386 user manual Pstn Pass Through, Call Features Table Star Code

Page 14

HandyTone-386 User Manual

Grandstream Networks, Inc.

Bellcore style 3-way conference is also supported. To do this, user needs to enable “Use Bell-style 3- way Conference” in FXS1 or FXS2 web configuration.

Assuming that call party A and B are in conversation. A wants to bring C in a conference:

1.A presses FLASH (on the analog phone, or Hook Flash for old model phones) to get a dial tone.

2.A dials C’s number then # (or wait for 4 seconds).

3.If C answers the call, then A press “flash” to bring B, C in the conference.

4.If C does not answer the call, A can press “flash” back to talk to B.

5.2.7PSTN Pass Through

HandyTone-386 supports PSTN pass through on FXS port 1. User can make and receive PSTN calls with attached analog phone in Phone 1 port. Phone 2 port (or FXS port 2) does NOT have this feature.

•To receive PSTN calls, simply make phone off hook when the analog phone rings.

•To make a PSTN call, simply press the PSTN access code (*00 is default, or any number configured in web configuration page) to switch to the PSTN line and get dial tone, then dial the number.

5.3Call Features

5.3.1Call Features Table (Star Code)

Following table shows the call features (* code) of HandyTone-386.

Key

Call Features

*23

3 way Conferencing

 

Refer 5.2.6 above for procedure to perform 3 way Calling.

*30

Block CallerID (for all-config change)

*31

Send CallerID (for all-config change)

*67

Block CallerID (per call)

*82

Send CallerID (per call)

*50

Disable Call Waiting (for all-config change)

*51

Enable Call Waiting (for all-config change)

*70

Disable Call Waiting. (Per Call)

*71

Enable Call Waiting (Per Call)

*72

Unconditional Call Forward.

 

To use this feature, dial “*72”, wait for the dial tone. Then dial

 

the forward number ended with #, wait for dial tone, hang up.

*73

Cancel Unconditional Call Forward

 

To cancel “Unconditional Call Forward”, dial “*73” and get the

 

dial tone, then hang up.

*87

Blind Transfer

 

Refer 5.2.5.1 above for procedure to perform Blind Transfer.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents HandyTone-386 For Firmware Release VersionTable of Contents Restore Factory Default SETTING…………………………………..40 Configuration File DownloadWelcome Installation 2LANGrandstream Networks, Inc Warranty What is Included in the PackageSafety Compliances Key Features Product OverviewHardware Specification Model HandyTone-386Basic Operations Get Familiar with Voice PromptDirect IP calls Make Phone CallsCalling phone or extension numbers Call Waiting Voice Prompt with option 47, then 192 168 000Call Hold Call Transfer Blind TransferBellcore Style 3-way Conference Attended Transfer6 3-way Conferencing Star Code Style 3-way Conference Pstn Pass Through Call FeaturesCall Features Table Star Code Pstn Pass Through / Life Line FAX SupportLED Light Pattern Indication Ringing Configuring HandyTone-386 with Web Browser Configuration GuideConfiguring HandyTone-386 LAN IP through Voice Prompt Password StatusNAT End User Password Web Port IP Address Time Zone Daylight Yes Savings TimeDhcp hostname PasswordEnd User Dhcp domainPstn Access Code Advanced Configuration and FXS ports Parameters Advanced SettingsFirmware Upgrade Admin PasswordTimeout Stun Server Home NPAConfig File Postfix Path Config Server PathPostfix Config File Prefix Automatic UpgradeSyslog Level Authenticate IDAuthenticate FXS Port 1Proxy-Require Disable Call- Waiting Volume Amplification TX FXS Port 2 User ID/extension to dial automatically when Offhook Use DNS SRV AuthenticationSIP Server User ID is PhoneFeatures RebootEnable Call Disable CallVoice Frames per NAT TraversalPreferred Vocoder G723 RateSpecial Feature Fax ModeUpdate VolumeSaving the Configuration Changes Rebooting the HandyTone-386 from RemoteConfiguration through a Central Server Click to reloginSoftware Upgrade Firmware Upgrade through TFTP/HTTPManaging Firmware and Configuration File Download Configuration File DownloadFirmware and Configuration File Prefix and Postfix Restore Factory Default Setting StepGlossary of Terms DSP DNSDid DtmfFXS Echo CancellationFXO DhcpIVR HttpIP-PBX MTURtcp OBP/SBCPstn RTPTftp StunTCP UDP
Top Page Image Contents