Grandstream Networks 386 user manual Password, Status

Page 18

HandyTone-386 User Manual

Grandstream Networks, Inc.

Once this HTTP request is entered and sent from a Web browser, the HandyTone-386 will respond with the following login screen:

Grandstream Device Configuration

Password

Login

All Rights Reserved Grandstream Networks, Inc. 2005

The password is case sensitive with maximum length of 25 characters. The factory default password for End User and administrator is “123” and “admin” respectively. Only administrator can get access to the “ADVANCED SETTING” configuration page.

NOTE:

•If you CAN NOT log into the configuration page by using default password, please check with the VoIP service provider. Most likely the VoIP service provider has provisioned the device and configured for you therefore the password has already been changed.

After a correct password is entered in the login screen, the embedded Web server inside the HandyTone-386 will respond with the Configuration pages which are explained in details below.

•Status Page:

18

Image 18

Contents HandyTone-386 For Firmware Release VersionTable of Contents Restore Factory Default SETTING…………………………………..40 Configuration File DownloadWelcome Installation 2LANGrandstream Networks, Inc What is Included in the Package Safety CompliancesWarranty Key Features Product OverviewHardware Specification Model HandyTone-386Basic Operations Get Familiar with Voice PromptMake Phone Calls Calling phone or extension numbersDirect IP calls Call Waiting Voice Prompt with option 47, then 192 168 000Call Hold Call Transfer Blind TransferAttended Transfer 6 3-way Conferencing Star Code Style 3-way ConferenceBellcore Style 3-way Conference Call Features Call Features Table Star CodePstn Pass Through FAX Support LED Light Pattern IndicationPstn Pass Through / Life Line Ringing Configuration Guide Configuring HandyTone-386 LAN IP through Voice PromptConfiguring HandyTone-386 with Web Browser Password StatusNAT End User Password Web Port IP Address Time Zone Daylight Yes Savings TimeDhcp hostname PasswordEnd User Dhcp domainPstn Access Code Advanced Configuration and FXS ports Parameters Advanced SettingsFirmware Upgrade Admin PasswordTimeout Stun Server Home NPAConfig File Postfix Path Config Server PathPostfix Config File Prefix Automatic UpgradeSyslog Level Authenticate IDAuthenticate FXS Port 1Proxy-Require Disable Call- Waiting Volume Amplification TX FXS Port 2 User ID/extension to dial automatically when Offhook Use DNS SRV AuthenticationSIP Server User ID is PhoneFeatures RebootEnable Call Disable CallVoice Frames per NAT TraversalPreferred Vocoder G723 RateSpecial Feature Fax ModeUpdate VolumeSaving the Configuration Changes Rebooting the HandyTone-386 from RemoteConfiguration through a Central Server Click to reloginSoftware Upgrade Firmware Upgrade through TFTP/HTTPConfiguration File Download Firmware and Configuration File Prefix and PostfixManaging Firmware and Configuration File Download Restore Factory Default Setting StepGlossary of Terms DSP DNSDid DtmfFXS Echo CancellationFXO DhcpIVR HttpIP-PBX MTURtcp OBP/SBCPstn RTPTftp StunTCP UDP