Grandstream Networks 386 Advanced Configuration and FXS ports Parameters, Advanced Settings

HandyTone-386 User Manual Grandstream Networks, Inc.

6.2.3Advanced Configuration and FXS ports Parameters

To login to the Advanced Setting and FXS port configuration pages, administrator password is required. The default administrator password is “admin”. User can change the administrator password here. The password is case sensitive and the maximum length is 25 characters.

•Advanced Settings Page:

Grandstream Device Configuration

	STATUS		BASIC	ADVANCED		FXS	FXS
		SETTINGS		SETTINGS		PORT1	PORT2
Admin Password:					(purposely		not displayed for security
		protection)
Home NPA:

Layer 3 QoS:

Layer 2 QoS:

STUN server is :

keep-alive interval:

Use NAT IP:

Firmware Upgrade and Provisioning:

48 (Diff-Serv or Precedence value)

802.1Q/VLAN Tag		0			802.1p priority value	0	(0-7)
stun.sipserver.com				(URI or IP:port)
20	(in seconds, default 20 seconds)
			(used in SIP/SDP message if specified)

Upgrade Via TFTP HTTP

Firmware Server Path: fm.grandstream.com/gs

Config Server Path: fm.grandstream.com/gs

		Firmware File Prefix:		Firmware File Postfix:
	Config File Prefix:			Config File Postfix:
Automatic Upgrade:
		No	Yes, check for upgrade every		10080	minutes (default 7
days)

Always Check for New Firmware

Check New Firmware only when F/W pre/suffix changes

23