| Grandstream Networks, Inc. | ||||
|
|
|
|
| |
| Unregister On |
| Default is No. If set to Yes, the device will first send registration request to |
| |
| Reboot |
| indicate SIP registra to remove previous bindings. |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Register Expiration |
| This parameter allows the user to specify the time frequency (in minutes) the |
| |
|
|
| HT386 will refresh its registration with the specified registrar. The default |
| |
|
|
| interval is 60 minutes (or 1 hour). The maximum interval is 65535 minutes |
| |
|
|
| (about 45 days). |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Local SIP port |
| This parameter defines the local SIP port the HT386 will listen and transmit. |
| |
|
|
| The default value is for FXS1 is 5060, FXS2 is 5062 |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Local RTP port |
| This parameter defines the local |
| |
|
|
| transmit. It is the base RTP port for channel 0. When configured, channel 0 will |
| |
|
|
| use this port_value for RTP and the port_value+1 for its RTCP; channel 1 will |
| |
|
|
| use port_value+2 for RTP and port_value+3 for its RTCP. The default value for |
| |
|
|
| FXS1 is 5004, FXS2 is 5008. |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Use Random Port |
| Default No. If set to Yes, the device will pick |
| |
|
|
| ports. This is usually necessary when multiple SIP devices are behind the same |
| |
|
|
| NAT. For Direct IP to IP call, this should be set to No. |
| |
|
|
|
|
|
|
|
|
|
| ||
| DTMF Payload |
| This parameter sets the payload type for DTMF using RFC2833 |
| |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Send DTMF |
| This parameter specifies the mechanism to transmit DTMF digit. There are 3 |
| |
|
|
| modes supported: in audio which means DTMF is combined in audio signal |
| |
|
|
| (not very reliable with |
| |
|
|
| INFO. |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Send Flash Event |
| Default is NO. If set to yes, flash will be sent as DTMF event. |
| |
|
|
|
|
|
|
|
|
|
| ||
| Enable Call |
| Default is Yes. Advance call features and feature codes functions are supported |
| |
| Features |
| locally |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Use |
| If this parameter is set to “Yes”, user will be able to make Bellcore style |
| |
|
|
| conference. *23 will be disabled. |
|
|
|
|
|
|
|
|
|
|
|
| ||
| Offhook |
| This parameter allows a user to configure a User ID or extension number to be |
| |
|
|
| automatically dialed upon offhook. Please note that only the user part of a SIP |
| |
|
|
| address needs to be entered here. The HT386 will automatically append the |
| |
|
|
| “@” and the host portion of the corresponding SIP address. |
| |
|
|
| NOTE: Please write down the IP address of the ATA if you use this feature as |
| |
|
|
| it will disable the IVR and the only way to access the HT386 is via web |
| |
|
|
| configuration page. |
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
| SIP Extension to notify SIP server that the unit is behind the NAT/Firewall. |
| |
|
|
|
|
|
|
|
|
|
| ||
| Disable Call |
| Default is No. User can use * code to use this feature per call basis. |
| |
| Waiting |
|
|
|
|
|
|
|
|
|
|
32