13
Chapter 3 - Hardware Installation
BR Router Back Panel
This section of the manual describes how to connect the BR Router to your Ethernet network and your wide area communications device. In summary, the steps for installation are:
1.Make sure the router is powered down and the power supply is not plugged in to the wall.
2.Wall mount the router, if required.
3.Connect the router to the Ethernet network.
4.Connect the router to the wide area line communications device.
5.Power up the line communications device.
6.Plug in the power supply and power up the router.
Mounting the Router
The BR Router can be left standalone on a desktop or equipment table, or can be wall mounted.
vNote: Wall mounting requires a
For wall mounting, follow the instructions included with the