18
Start Windows. Insert the diskette into your computer’s disk drive. At the Windows Program Manager, select “Run” from the File menu and type A:SETUP (where A: is the drive containing the RouterView diskette). This will invoke an
The installation program will ask you to select (or create) a directory in which it should locate RouterView and its associated files and database subdirectory.
Once the installation is complete, double click on the RouterView icon to open the program. For further information on using RouterView, see the RouterView Reference Guide included with your router.
vNote: RouterView will be able to use the transport protocol (IP or IPX) you have selected to access DCB routers anywhere on your internetwork. This means you can use the IP transport option to manage routers across the global Internet network if you are connected to it.
vNote: For an
RouterView for Macintosh
RouterView for Macintosh allows you to manage the BR Router from an Apple Macintosh or compatible computer. RouterView for Macintosh uses the AppleTalk protocol to communicate with the router.
System Requirements
A Macintosh version of RouterView was included with your router. You can run RouterView from any Macintosh on your network that meets the following technical specifications:
•Macintosh with 68030 or later processor (including PowerPC)
•System 7.0 or later.
vNote: Although older Macintoshes such as SE/30’s and IIsi’s will run RouterView adequately for infrequent use, a newer/faster machine is preferable for larger networks where RouterView will be used more often.
Installing and Running RouterView for Macintosh
To install RouterView for Macintosh, simply insert the RouterView diskette into the floppy drive of your Macintosh. Then double click on the self extracting archive (.sea) icon. You will be asked where you would like to locate your copy of the RouterView program and data files.