32
Frame Relay DLCI Mappings
If you are connecting to another DCB router, this information is not required. DCB uses IARP (Inverse Address Resolution Protocol) to dynamically generate this information. To connect to other vendors’ routers which do not support IARP, or do not have it turned on, you must provide DLCI to protocol mapping information.
RV: Use the DLCI Mapping Database window.
CL: Use interface(misc) and then frelay(set).
Physical Comm Settings
You may need to set the baud rate, sync/async operation, and other physical communications parameters for the WAN port. These parameters will depend on the line communications device you are using.
RV: Use the WAN/General window.
CL: Use interface(misc) and then wan serial(set).