Black Box LES422A manual Upgrading the Hardened Serial Server Firmware, Downloading Firmware Files

Page 40

Chapter 5: Upgrading the Hardened Serial Server Firmware

5. Upgrading the Hardened Serial Server Firmware

Occasionally, updated firmware may become available for your Hardened Serial Server. The firmware can be upgraded using the Hardened Serial Server Software. The following procedure describes the firmware updating process:

1. Click the “Upgrade” button to open the Firmware Upgrade window.

Figure 5-1. Firmware Upgrade dialog box.

The name of the currently selected Hardened Serial Server appears in the top drop down list. Other Hardened Serial Servers (that have already been discovered) can be selected from the drop-down list, if desired.

The current firmware version of the selected Hardened Serial Server is shown in the text below the Hardened Serial Server name.

Information about the selected firmware file is shown in the third text box.

5.1 Downloading Firmware Files

The “Firmware File” list (second box) displays all firmware files in the firmware installation folder. Only firmware that is compatible with the selected Hardened Serial Server is available in this list.

To download the latest firmware files from an FTP site on the Internet:

1. Click the “Internet” button at the bottom of the window.

The Hardened Serial Server Software connects to an FTP server on the Internet.

2.Click the “Check for Updates” button.

“Progress Bar” and “Progress Box” display information about and progress of the download.

To download the latest firmware files from a file:

1.Click the “Browse” button to open an “Open File” dialog box.

2.Browse to the drive and folder containing the firmware file.

3.Select and download the file to the local firmware folder.

Page 40

724-746-5500 blackbox.com

Image 40
Contents 4-Port Hardened Serial Servers Trademarks Used in this Manual Trademarks Used in this ManualFCC and IC RFI Statements NOM Statement Table of Contents Table of Contents Specifications General SpecificationsSerial Interface Network Specifications NetworkConfiguration over TCP TCP/UDP PortsDimensional Diagrams Specifications Overview FeaturesOverview Introduction What‘s Included Hardware Description 1 1-Port Hardened Serial Server LES421A2 2-Port Hardened Serial Server LES422A LES421A components3 4-Port Hardened Serial Server LES424A LES422A componentsConfiguration Software LES424A componentsInstallation and Setup Installation and Initial SetupConnecting the Power Supply Connecting Hardened Serial Servers to Serial Devices3 RS-485 2 RS-422Ethernet Passthrough Port Hardened Serial Server Configuration Installation and Initial SetupConfiguring via the Network using a Browser Hardened Serial Server Operational Connections Direct IP and Virtual COM port connectionInstalling and Starting Hardened Serial Server Software Paired mode setupDiscovering Hardened Serial Servers Configuring the Hardened Serial Server IconsConfiguration Pane Hardened Serial Server Information TableLogin Click Login General Configuration page appears LoggingNavigating the Configuration Pages Setting Up the Hardened Serial Server Name and PasswordChanging the Password Changing the Hardened Serial Servers NameSetting Up Dynamic IP Addressing Setting Up IP AddressingSetting Up Static IP Addressing Setting Up Port Network Parameters Setting Up Serial PortsTCP Configuration Configuring the Hardened Serial Server UDP Configuration 11. TCP server settingsConfiguring the Hardened Serial Server Setting Up Virtual COM Vcom Operation Setting Up Paired Mode Operation16. IP addresses Setting Up Advanced Network Settings Configuring the Serial ServerConfiguring When Network Connections will be Forced Closed Configuring when Data Packets are Sent Configuring the Hardened Serial Server Saving/Restoring the Configuration Settings Adding Virtual COM Ports Removing Virtual COM Ports Upgrading the Hardened Serial Server Firmware Upgrading the Hardened Serial Server FirmwareDownloading Firmware Files Uploading the Firmware to the Hardened Serial Server Operation LED Indicators OperationNetwork at the same IP address Front panel of the LES424A LEDs on the LES424A serial server Reset Switch Using the Reset Switch to Initiate a Hardware ResetUsing the Reset Switch to Enter Console Mode Using the Reset Switch to Exit Console ModeDiagnostics DiagnosticsTesting a Hardened Serial Server Connection Testing a Virtual COM Port Testing a Hardened Serial Server ConnectionListing/Descriptions of Hardened Serial Server Settings Listing/Descriptions of Hardened Serial Server SettingsListing/Descriptions of Hardened Serial Server Settings TCP/IP properties OFF Listing/Descriptions of Hardened Serial Server Settings Listing/Descriptions of Hardened Serial Server Settings Appendix a Default Server Settings Appendix A. Default Server SettingsAppendix B. Connector Pinouts DB9 M Connector Appendix B Connector PinoutsTerminal Block Standard Ethernet Cable RJ-45 Pinout Blackbox.com Blackbox.com Blackbox.com Black Box Tech Support FREE! Live /7