Adjustments
A number of digital controls are provided to allow you to optimize the display parameters to your preferences.
You can adjust the picture to your preferences by following the procedure described below.
You can adjust all items on the OSD (On Screen Display).
Control Panel
RESET
Contrast
The adjustment data becomes the common setting for all input signals.
1Press the >+/– button.
The > OSD (On Screen Display) appears.
50
31.5kHz/70Hz
2Press the >+/– button to adjust picture contrast.
+...for more contrast
Brightness
The adjustment data becomes the common setting for all input signals.
1Press the ¬+/– button.
The ¬ OSD (On Screen Display) appears.
50
31.5kHz/70Hz
2Press the ¬+/– button to adjust picture brightness.
+...for more brightness
Push this part to open the control panel cover.
pWhen the limit value is reached, the POWER SAVING indicator will begin to flash.
pAdjustments will be stored automatically.
pThe OSD automatically disappears 2 seconds after you release the buttons.
POWER
SAVING
Horizontal centering
The adjustment data becomes the unique setting for the input signal received.
1Press the Sº/õbutton.
The S OSD (On Screen Display) appears.
50
2Press the Sº/õbutton.
º...to move right õ...to move left
Vertical centering
The adjustment data becomes the unique setting for the input signal received.
1Press the s×/Ãbutton.
The sOSD (On Screen Display) appears.
50
2Press the s×/Ãbutton.
×...to move up
Ã...to move down
4