Sony PCV-RXP-RZP manual Link S400 Ieee 1394 Ports, Speaker DC Out Jack

Page 27

Identifying Components

13

i.LINK S400 (IEEE 1394) Ports

The 6-pin i.LINK® port on the back panel of the system can supply power from the computer to an i.LINK device if the device also has a 6-pin i.LINK port. The 6-pin port supplies 10 V to 12 V and a maximum power of 6 watts.

i.LINK is a trademark of Sony used only to designate that a product contains an IEEE 1394 connection. The i.LINK connection may vary, depending on the software applications, operating system and compatible i.LINK devices. All products with an i.LINK connection may not communicate with each other.

Refer to the documentation that came with your compatible i.LINK device for information on operating conditions and proper connections. Before connecting compatible i.LINK devices to your system, such as an optical disc or hard disk drive, confirm their operating system compatibility and required operating conditions.

The 4-pin i.LINK port at the bottom of the front panel does not supply power to an i.LINK device.

6-pin i.LINK port

4-pin i.LINK port

 

(IEEE 1394)

(IEEE 1394)

 

 

 

 

 

Behind lower

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

On back of

 

system

front panel

Speaker DC Out Jack

The Speaker DC Out jack on the back panel of the system is the connection for the supplied speaker power cable.

Image 27
Contents Page Vaio Digital Studio System Reference Manual Owner’s Record Safety Information and Caution Page Vaio Digital Studio System Reference Manual Regulatory Information FCC Part Disposal of Lithium Battery Industry Canada Notice Contents System Board Index SpecificationsXiv Chapter Identifying Components Front View PCV-RZ Series model Drive Description DrivesButton or switch Description Buttons and SwitchesIndicator Description IndicatorsConnector Description Connectors Models Equipped with Giga Pocket FeaturesDIF Rear View Model Equipped with Giga Pocket FeaturesIconDescription Icon LabelsIdentifying Components Ethernet Port ConnectorsKeyboard and Mouse Ports USB PortsVGA Monitor Port Printer PortDIF Optical Out Port Telephone and Modem Line JacksSpeaker DC Out Jack Link S400 Ieee 1394 PortsExpansion Slot No Description Expansion SlotsChapter Configuring Your System Accessing the Bios Setup Utility Changing Power Management Settings Vaio Digital Studio System Reference Manual Click the Advanced tab Select the desired settings Vaio Digital Studio System Reference Manual Configuring Your System Vaio Digital Studio System Reference Manual Chapter Upgrading and Maintaining Components To remove the side panel PCV-RZ series model Removing the Side PanelRemoving the side panel PCV-RX series model To remove the side panel PCV-RX series modelTo replace the side panel PCV-RZ series model Replacing the Side PanelReplacing the side panel PCV-RX series model To replace the side panel PCV-RX series modelTo install an add-on card Installing an Add-on CardRemoving the slot cover Installing an add-on card Page Vaio Digital Studio System Reference Manual Replacing the Lithium Battery Page Upgrading and Maintaining Components Removing a Memory Module Removing a memory module PCV-RZ series model Page Memory module configurations MB Installing Memory ModulesDDR-DIMM Upgrading and Maintaining Components Removing a slot cover PCV-RX series model Removing a Slot CoverCovering an open I/O slot PCV-RX series model Covering an Open I/O SlotInstalling an Additional Hard Disk Drive Disconnecting the system PCV-RX series model Disconnect the drive connector aInstalling an internal hard disk drive PCV-RX series model Drive connectors Power connectors Tab Disk drive holder To identify additional hard disk space Removing the power supply PCV-RX series model Removing the Power Supply PCV-RX series modelsReplacing the Power Supply PCV-RX series model Chapter System Board Memory Module DDR-DIMM Slots Pin Signal Name Power Supply and Aux Power HeadersPin Jumper Plug Position Function CLR Cmos JumperVaio Digital Studio System Reference Manual Chapter Cmos Setup Options Vaio Digital Studio System Reference Manual Main Screen CD-ROM Advanced Screen 3BCH/IRQ7 Power Screen USB FDD Boot ScreenExit Screen Vaio Digital Studio System Reference Manual Chapter Miscellaneous Technical Information If you set these passwords Following passwords are required User and Supervisor PasswordsBeep Code Error Messages Message Meaning PCI Configuration Status and Error MessagesMiscellaneous Technical Information DMA Channel Assignments DMA Default Channel AssignmentResource Device Status System I/O Address MapAddresses that may be used by add-on cards are not listed Resource Device Memory MapIRQ Settings Processor ChipsetAGP Bus L2 Cache Memory ConfigurationsPCI Bus Memory ModulesAudio CommunicationsGiga Pocket I/O Expansion Slots Floppy Disk Drive and ControllerHard Drives and Controller Optical Drives System BiosVaio Digital Studio System Reference Manual Index Vaio Digital Studio System Reference Manual Index Vaio Digital Studio System Reference Manual