Sony PCV-RXP-RZP manual FCC Part

Page 8

viii

VAIO Digital Studio System Reference Manual

FCC Part 68

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear of this equipment is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

This modem uses the USOC RJ-11 telephone jack.

A telephone plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. The REN is used to determine the quantity of devices which may be connected to the telephone line.

Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g. 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label

If this equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operations of the equipment. If this happens, the telephone company will provide advance notice in order for you to make the necessary modifications in order to maintain uninterrupted service.

If trouble is experienced with this equipment, for repair or warranty information, please contact the Sony Customer Information Service Center at 1-888- 4-SONY-PC (1-888-476-6972), or write to the Sony Customer Information Center, 12451 Gateway Blvd., Fort Myers, FL 33913, or find Sony Customer Service on the Web at http://www.sony.com/ pcsupport. If this equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment from the network until the problem is resolved.

Repair of this equipment should be made only by a Sony Service Center or Sony authorized agent. For the Sony Service Center nearest you, call 1-888-4- SONY-PC (1-888-476-6972), or visit the Sony Computing Web site at http://www.sony.com/ pcsupport.

Connection to Party Line Service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.

Please use a surge arrestor against electrical surges.

Telephone Consumer

Protection Act of 1991

(United States)

The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including FAX machines, to send any message unless such message clearly contains, in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long distance transmission charges.)

In order to program this information into your facsimile machine, see your fax software documentation.

Telephone Consumer

Guidelines (Canada)

Please refer to your telephone directory under ‘Privacy Issues’ and/or ‘Terms of Service.’ For more detailed information, please contact:

CRTC

Terrasses de la Chaudiére

Tour centrale 1 promenade du Portage 5 étage Hull PQ K1A 0N2.

This Class B digital apparatus complies with Canadian ICES-003.

Cet àppareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Image 8
Contents Page Vaio Digital Studio System Reference Manual Owner’s Record Safety Information and Caution Page Vaio Digital Studio System Reference Manual Regulatory Information FCC Part Disposal of Lithium Battery Industry Canada Notice Contents System Board Specifications IndexXiv Chapter Identifying Components Front View PCV-RZ Series model Drives Drive DescriptionButtons and Switches Button or switch DescriptionIndicators Indicator DescriptionConnectors Models Equipped with Giga Pocket Features Connector DescriptionRear View Model Equipped with Giga Pocket Features DIFIcon Labels IconDescriptionIdentifying Components Connectors Keyboard and Mouse PortsUSB Ports Ethernet PortPrinter Port VGA Monitor PortTelephone and Modem Line Jacks DIF Optical Out PortLink S400 Ieee 1394 Ports Speaker DC Out JackExpansion Slots Expansion Slot No DescriptionChapter Configuring Your System Accessing the Bios Setup Utility Changing Power Management Settings Vaio Digital Studio System Reference Manual Click the Advanced tab Select the desired settings Vaio Digital Studio System Reference Manual Configuring Your System Vaio Digital Studio System Reference Manual Chapter Upgrading and Maintaining Components Removing the Side Panel To remove the side panel PCV-RZ series modelTo remove the side panel PCV-RX series model Removing the side panel PCV-RX series modelReplacing the Side Panel To replace the side panel PCV-RZ series modelTo replace the side panel PCV-RX series model Replacing the side panel PCV-RX series modelInstalling an Add-on Card To install an add-on cardRemoving the slot cover Installing an add-on card Page Vaio Digital Studio System Reference Manual Replacing the Lithium Battery Page Upgrading and Maintaining Components Removing a Memory Module Removing a memory module PCV-RZ series model Page Installing Memory Modules Memory module configurations MBDDR-DIMM Upgrading and Maintaining Components Removing a Slot Cover Removing a slot cover PCV-RX series modelCovering an Open I/O Slot Covering an open I/O slot PCV-RX series modelInstalling an Additional Hard Disk Drive Disconnect the drive connector a Disconnecting the system PCV-RX series modelInstalling an internal hard disk drive PCV-RX series model Drive connectors Power connectors Tab Disk drive holder To identify additional hard disk space Removing the Power Supply PCV-RX series models Removing the power supply PCV-RX series modelReplacing the Power Supply PCV-RX series model Chapter System Board Memory Module DDR-DIMM Slots Power Supply and Aux Power Headers Pin Signal NamePin CLR Cmos Jumper Jumper Plug Position FunctionVaio Digital Studio System Reference Manual Chapter Cmos Setup Options Vaio Digital Studio System Reference Manual Main Screen CD-ROM Advanced Screen 3BCH/IRQ7 Power Screen Boot Screen USB FDDExit Screen Vaio Digital Studio System Reference Manual Chapter Miscellaneous Technical Information User and Supervisor Passwords If you set these passwords Following passwords are requiredBeep Code Error Messages PCI Configuration Status and Error Messages Message MeaningMiscellaneous Technical Information DMA Default Channel Assignment DMA Channel AssignmentsSystem I/O Address Map Resource Device StatusAddresses that may be used by add-on cards are not listed Memory Map Resource DeviceIRQ Settings AGP Bus ProcessorChipset Memory Configurations PCI BusMemory Modules L2 CacheGiga Pocket I/O AudioCommunications Hard Drives and Controller Expansion SlotsFloppy Disk Drive and Controller System Bios Optical DrivesVaio Digital Studio System Reference Manual Index Vaio Digital Studio System Reference Manual Index Vaio Digital Studio System Reference Manual