Sony PCV-RXP-RZP manual Chapter Cmos Setup Options

Page 71

Chapter 5

CMOS Setup Options

This chapter describes each screen in the Award BIOS Setup Utility (see “Accessing the BIOS Setup Utility” on page 16).

The Award BIOS setup has five menu items on the menu bar. These are:

Main

Advanced

Power

Boot

Exit

Options that you can change are enclosed in brackets. Text that is not enclosed in brackets cannot be changed.

Asmall triangle ( ) indicates that there is a sub-menu with additional information and options. Press Enter to display the sub-menu. The information and options in a sub-menu are context-sensitive (they appear or disappear, depending on which options you select).

The item shown in [brackets] in this guide is the default option. The option shown in [brackets] on the screen is the option currently set for your system.

The other available options for each item are shown without brackets directly below the default option in this guide. The available options are listed in the order they occur when you press the + key.

Use the left and right arrow keys to choose a menu item. Use the up and down arrow keys to select an option. Press Enter to display a list of options, or press the + or - key to cycle through the other options.

If you display the list of options, use the up and down arrow keys to select an option in the list, then press Enter to choose the selection.

Press Esc to go back to the main menu.

57

Image 71
Contents Page Vaio Digital Studio System Reference Manual Owner’s Record Safety Information and Caution Page Vaio Digital Studio System Reference Manual Regulatory Information FCC Part Disposal of Lithium Battery Industry Canada Notice Contents System Board Index SpecificationsXiv Chapter Identifying Components Front View PCV-RZ Series model Drive Description DrivesButton or switch Description Buttons and SwitchesIndicator Description IndicatorsConnector Description Connectors Models Equipped with Giga Pocket FeaturesDIF Rear View Model Equipped with Giga Pocket FeaturesIconDescription Icon LabelsIdentifying Components Ethernet Port ConnectorsKeyboard and Mouse Ports USB PortsVGA Monitor Port Printer PortDIF Optical Out Port Telephone and Modem Line JacksSpeaker DC Out Jack Link S400 Ieee 1394 PortsExpansion Slot No Description Expansion SlotsChapter Configuring Your System Accessing the Bios Setup Utility Changing Power Management Settings Vaio Digital Studio System Reference Manual Click the Advanced tab Select the desired settings Vaio Digital Studio System Reference Manual Configuring Your System Vaio Digital Studio System Reference Manual Chapter Upgrading and Maintaining Components To remove the side panel PCV-RZ series model Removing the Side PanelRemoving the side panel PCV-RX series model To remove the side panel PCV-RX series modelTo replace the side panel PCV-RZ series model Replacing the Side PanelReplacing the side panel PCV-RX series model To replace the side panel PCV-RX series modelTo install an add-on card Installing an Add-on CardRemoving the slot cover Installing an add-on card Page Vaio Digital Studio System Reference Manual Replacing the Lithium Battery Page Upgrading and Maintaining Components Removing a Memory Module Removing a memory module PCV-RZ series model Page Memory module configurations MB Installing Memory ModulesDDR-DIMM Upgrading and Maintaining Components Removing a slot cover PCV-RX series model Removing a Slot CoverCovering an open I/O slot PCV-RX series model Covering an Open I/O SlotInstalling an Additional Hard Disk Drive Disconnecting the system PCV-RX series model Disconnect the drive connector aInstalling an internal hard disk drive PCV-RX series model Drive connectors Power connectors Tab Disk drive holder To identify additional hard disk space Removing the power supply PCV-RX series model Removing the Power Supply PCV-RX series modelsReplacing the Power Supply PCV-RX series model Chapter System Board Memory Module DDR-DIMM Slots Pin Signal Name Power Supply and Aux Power HeadersPin Jumper Plug Position Function CLR Cmos JumperVaio Digital Studio System Reference Manual Chapter Cmos Setup Options Vaio Digital Studio System Reference Manual Main Screen CD-ROM Advanced Screen 3BCH/IRQ7 Power Screen USB FDD Boot ScreenExit Screen Vaio Digital Studio System Reference Manual Chapter Miscellaneous Technical Information If you set these passwords Following passwords are required User and Supervisor PasswordsBeep Code Error Messages Message Meaning PCI Configuration Status and Error MessagesMiscellaneous Technical Information DMA Channel Assignments DMA Default Channel AssignmentResource Device Status System I/O Address MapAddresses that may be used by add-on cards are not listed Resource Device Memory MapIRQ Settings AGP Bus ProcessorChipset L2 Cache Memory ConfigurationsPCI Bus Memory ModulesGiga Pocket I/O AudioCommunications Hard Drives and Controller Expansion SlotsFloppy Disk Drive and Controller Optical Drives System BiosVaio Digital Studio System Reference Manual Index Vaio Digital Studio System Reference Manual Index Vaio Digital Studio System Reference Manual