Sony PCV-RXP-RZP manual PCI Bus, Memory Modules, Memory Configurations, L2 Cache, Graphics

Page 92

78

VAIO Digital Studio System Reference Manual

PCI Bus

PCI Level 2.2, 33 MHz zero wait state

Three PCI slots - not all slots are available. (See online specifications sheet for details.)

Memory Modules

Installed memory

See online specifications sheet for details.

Maximum memory

1.0 GB (512 MB in each socket)

 

 

Voltage

2.5 V memory only

 

 

Pins

184-pins with gold-plated contacts

 

 

Memory type

2.5 V PC2700 DDR-SDRAM unrestricted, unbuffered,

 

64-bit (Non-ECC) DDR-SDRAM DIMM modules

 

 

Memory Configurations

DIMM1*

DIMM2*

0, 128, 256, 512

0, 128, 256, 512

 

 

*Your computer ships with at least 512 MB and is expandable to 1.0 GB. DDR-DIMM memory modules must be 2.5 volts, PC2700, 4-clock between sockets and 64-bit or 42-bit 133 MHz SDRAM.

L2 Cache

Installed512 KB of Advanced Transfer cache

Graphics

AGP Controller*

See online specifications sheet for details.

Video memory

See online specifications sheet for details.

Resolution (displayed resolution depends on the graphics display you use)

True color (32-bits)

Up to 1600 x 1200 at 85 Hz non-interlaced

High color (16-bits)

Up to 1600 x 1200 at 100 Hz non-interlaced

 

 

256 colors (8-bits)

Up to 1600 x 1200 at 100 Hz non-interlaced

 

 

* Supports DDC-1 and DDC-2b standards for Plug and Play displays.

Image 92
Contents Page Vaio Digital Studio System Reference Manual Owner’s Record Safety Information and Caution Page Vaio Digital Studio System Reference Manual Regulatory Information FCC Part Disposal of Lithium Battery Industry Canada Notice Contents System Board Specifications IndexXiv Chapter Identifying Components Front View PCV-RZ Series model Drives Drive DescriptionButtons and Switches Button or switch DescriptionIndicators Indicator DescriptionConnectors Models Equipped with Giga Pocket Features Connector DescriptionRear View Model Equipped with Giga Pocket Features DIFIcon Labels IconDescriptionIdentifying Components Connectors Keyboard and Mouse PortsUSB Ports Ethernet PortPrinter Port VGA Monitor PortTelephone and Modem Line Jacks DIF Optical Out PortLink S400 Ieee 1394 Ports Speaker DC Out JackExpansion Slots Expansion Slot No DescriptionChapter Configuring Your System Accessing the Bios Setup Utility Changing Power Management Settings Vaio Digital Studio System Reference Manual Click the Advanced tab Select the desired settings Vaio Digital Studio System Reference Manual Configuring Your System Vaio Digital Studio System Reference Manual Chapter Upgrading and Maintaining Components Removing the Side Panel To remove the side panel PCV-RZ series modelTo remove the side panel PCV-RX series model Removing the side panel PCV-RX series modelReplacing the Side Panel To replace the side panel PCV-RZ series modelTo replace the side panel PCV-RX series model Replacing the side panel PCV-RX series modelInstalling an Add-on Card To install an add-on cardRemoving the slot cover Installing an add-on card Page Vaio Digital Studio System Reference Manual Replacing the Lithium Battery Page Upgrading and Maintaining Components Removing a Memory Module Removing a memory module PCV-RZ series model Page Installing Memory Modules Memory module configurations MBDDR-DIMM Upgrading and Maintaining Components Removing a Slot Cover Removing a slot cover PCV-RX series modelCovering an Open I/O Slot Covering an open I/O slot PCV-RX series modelInstalling an Additional Hard Disk Drive Disconnect the drive connector a Disconnecting the system PCV-RX series modelInstalling an internal hard disk drive PCV-RX series model Drive connectors Power connectors Tab Disk drive holder To identify additional hard disk space Removing the Power Supply PCV-RX series models Removing the power supply PCV-RX series modelReplacing the Power Supply PCV-RX series model Chapter System Board Memory Module DDR-DIMM Slots Power Supply and Aux Power Headers Pin Signal NamePin CLR Cmos Jumper Jumper Plug Position FunctionVaio Digital Studio System Reference Manual Chapter Cmos Setup Options Vaio Digital Studio System Reference Manual Main Screen CD-ROM Advanced Screen 3BCH/IRQ7 Power Screen Boot Screen USB FDDExit Screen Vaio Digital Studio System Reference Manual Chapter Miscellaneous Technical Information User and Supervisor Passwords If you set these passwords Following passwords are requiredBeep Code Error Messages PCI Configuration Status and Error Messages Message MeaningMiscellaneous Technical Information DMA Default Channel Assignment DMA Channel AssignmentsSystem I/O Address Map Resource Device StatusAddresses that may be used by add-on cards are not listed Memory Map Resource DeviceIRQ Settings AGP Bus ProcessorChipset Memory Configurations PCI BusMemory Modules L2 CacheGiga Pocket I/O AudioCommunications Hard Drives and Controller Expansion SlotsFloppy Disk Drive and Controller System Bios Optical DrivesVaio Digital Studio System Reference Manual Index Vaio Digital Studio System Reference Manual Index Vaio Digital Studio System Reference Manual