Sony PCV-RXP-RZP manual

Page 5

To prevent fire or shock hazard, do not expose your desktop to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Never install modem or telephone wiring during a lightning storm.

Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

Never touch uninsulated telephone wire or terminals unless the telephone line has been disconnected at the network interface.

Use caution when installing or modifying telephone lines.

Avoid using the modem during an electrical storm.

Do not use the modem or a telephone to report a gas leak in the vicinity of the leak.

The socket outlet shall be installed near the equipment and shall be easily accessible.

!To change the backup battery, please contact your nearest Sony Service Center.

!Caution—The use of optical instruments with this product will increase eye hazard. As the laser beam used in this product is harmful to the eyes, do not attempt to disassemble the drive cabinet. Refer servicing to qualified personnel only.

v

!Danger—Visible and invisible laser radiation when open. Avoid direct exposure to beam.

!For DVD-RW: Danger—Visible and invisible laser radiation when open. Avoid direct exposure to beam.

!For CD-RW: Danger—Invisible laser radiation when open. Avoid direct exposure to beam.

!Caution—For ADSL and V.90 modem models; to reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

Image 5
Contents Page Vaio Digital Studio System Reference Manual Owner’s Record Safety Information and Caution Page Vaio Digital Studio System Reference Manual Regulatory Information FCC Part Disposal of Lithium Battery Industry Canada Notice Contents System Board Index SpecificationsXiv Chapter Identifying Components Front View PCV-RZ Series model Drive Description DrivesButton or switch Description Buttons and SwitchesIndicator Description IndicatorsConnector Description Connectors Models Equipped with Giga Pocket FeaturesDIF Rear View Model Equipped with Giga Pocket FeaturesIconDescription Icon LabelsIdentifying Components Keyboard and Mouse Ports ConnectorsUSB Ports Ethernet PortVGA Monitor Port Printer PortDIF Optical Out Port Telephone and Modem Line JacksSpeaker DC Out Jack Link S400 Ieee 1394 PortsExpansion Slot No Description Expansion SlotsChapter Configuring Your System Accessing the Bios Setup Utility Changing Power Management Settings Vaio Digital Studio System Reference Manual Click the Advanced tab Select the desired settings Vaio Digital Studio System Reference Manual Configuring Your System Vaio Digital Studio System Reference Manual Chapter Upgrading and Maintaining Components To remove the side panel PCV-RZ series model Removing the Side PanelRemoving the side panel PCV-RX series model To remove the side panel PCV-RX series modelTo replace the side panel PCV-RZ series model Replacing the Side PanelReplacing the side panel PCV-RX series model To replace the side panel PCV-RX series modelTo install an add-on card Installing an Add-on CardRemoving the slot cover Installing an add-on card Page Vaio Digital Studio System Reference Manual Replacing the Lithium Battery Page Upgrading and Maintaining Components Removing a Memory Module Removing a memory module PCV-RZ series model Page Memory module configurations MB Installing Memory ModulesDDR-DIMM Upgrading and Maintaining Components Removing a slot cover PCV-RX series model Removing a Slot CoverCovering an open I/O slot PCV-RX series model Covering an Open I/O SlotInstalling an Additional Hard Disk Drive Disconnecting the system PCV-RX series model Disconnect the drive connector aInstalling an internal hard disk drive PCV-RX series model Drive connectors Power connectors Tab Disk drive holder To identify additional hard disk space Removing the power supply PCV-RX series model Removing the Power Supply PCV-RX series modelsReplacing the Power Supply PCV-RX series model Chapter System Board Memory Module DDR-DIMM Slots Pin Signal Name Power Supply and Aux Power HeadersPin Jumper Plug Position Function CLR Cmos JumperVaio Digital Studio System Reference Manual Chapter Cmos Setup Options Vaio Digital Studio System Reference Manual Main Screen CD-ROM Advanced Screen 3BCH/IRQ7 Power Screen USB FDD Boot ScreenExit Screen Vaio Digital Studio System Reference Manual Chapter Miscellaneous Technical Information If you set these passwords Following passwords are required User and Supervisor PasswordsBeep Code Error Messages Message Meaning PCI Configuration Status and Error MessagesMiscellaneous Technical Information DMA Channel Assignments DMA Default Channel AssignmentResource Device Status System I/O Address MapAddresses that may be used by add-on cards are not listed Resource Device Memory MapIRQ Settings AGP Bus ProcessorChipset PCI Bus Memory ConfigurationsMemory Modules L2 CacheGiga Pocket I/O AudioCommunications Hard Drives and Controller Expansion SlotsFloppy Disk Drive and Controller Optical Drives System BiosVaio Digital Studio System Reference Manual Index Vaio Digital Studio System Reference Manual Index Vaio Digital Studio System Reference Manual