Sony PCV-RXP-RZP manual Upgrading and Maintaining Components

Upgrading and Maintaining Components

41

8 Press down firmly and evenly at both corners until the module is fully seated.

✍When the module is fully seated, the handles on each side are straight up and locked into the slot on each side of the module. If the handles are not totally straight upright, continue to press down on each side of the module until the handles lock into place.

9 Replace the power supply (see “Replacing the Power Supply (PCV-RX series model)” on page 50).*

10

11

Replace the side panel (see “Replacing the Side Panel” on page 26).

Reconnect the power cord and turn on the computer.

After restarting your computer, the system recognizes the additional memory and automatically make the proper configurations.

* Applicable to PCV-RX models only.