Customizing Your C1 PictureBook Computer
51 |
Using the Programmable Power Key with Other Keys
You can also choose to start other applications by pressing the programmable power key in combination with the Alt, Ctrl, or Shift keys.
To select the key combination,
Using the internal timer
You can use the internal timer to start software at a specific time. You can use this feature when the computer is on or in System Suspend mode.
✍If the computer's LCD is closed, you cannot use the internal timer to start software using the default settings. To start software while the LCD is closed, click the Enable/Disable tab and select the checkbox next to Enable Timer launch even if the LCD Panel is closed. It may take some time to actually start the software. It is advised that you confirm the time your selected software takes to start.
When selecting software that uses a phone line, the computer may not be able to disconnect the phone line due to communication and server conditions. Be sure to monitor the status of the software when running PPK Setup, and manually disconnect the phone line if you notice a malfunction. Furthermore, when using the timer to start the software, it is advised that you set the computer to enter System Suspend or System Hibernation mode after a certain time. This allows the computer to disconnect the phone line if the computer fails to disconnect the line normally. However, the computer cannot disconnect the phone line when it enters System Suspend mode unless the internal modem ring resume is set to On.