RECORDING
English | MINI HIFI SYSTEM | PROGRAM |
|
|
| STEREO |
|
|
| REPEAT TIMER REC |
|
|
| BACK |
|
|
| NEWS T.A. AM MW FMLW |
|
|
| FRONT HSD |
|
|
| 60Hz | 250Hz 500Hz1KHz | 2KHz 4KHz | 8KHz |
| |
| STANDBY |
|
|
|
|
|
|
| ON |
|
|
|
|
|
|
| CLOCK/ | CD1 • 2 • 3 | BAND | TAPE 1 • 2 CDR / VIDEO |
| ||
| TIMER |
| |||||
|
| CD | TUNER | TAPE | AUX |
| |
|
| PROG |
| SIDE | A•B | ▲ PRESET ▲ | A.REV |
|
| SEARCH • TUNING STOP• CLEAR | PLAY | PAUSE | PREV SIDE NEXT |
| |
| DUB |
|
|
|
|
|
|
| (HSD) |
|
|
|
|
|
|
| REC |
| SOUND NAVIGATION |
| |||
|
| DIGITAL SOUND | DYNAMIC BASS |
| |||
|
| CONTROL | BOOST |
| |||
22
C
LR
PRO LOGIC
SS
MIC
LEVEL
MIC
SWITCH OFF DOLBY PRO LOGIC
WHEN RECORDING
Notes:
–It is not possible to change tape side during recording.
–If you do not intend to record via the microphone, unplug the microphone to avoid accidental mixing with other recording source.
–For recording, use only tape of IEC type I (normal tape) or IEC type II (Cr02).
–The tape is secured at both ends with leader tape. At the beginning and end of tape, nothing will be recorded for six to seven seconds.
–The recording level is set automatically, regardless of the position of Volume, DBB or DSC.
–To prevent accidental recording, break out the tab on the left shoulder of the tape side you want to protect.
–If “CHECK TAPE” is displayed, the protection tab has been broken. Put a piece of clear adhesive tape over the
opening. Do not cover the Cr02 tape detection hole when covering the tab opening.
Recording from other sources
(only on tape deck 2)
1Press TAPE ( TAPE 1•2 ) to select tape deck 2.
2Load a blank tape into tape deck 2 with the open side downward.
3Press íor ëto select the recording tape side (see Tape Side under TAPE section).
4Press CD, TUNER or AUX.
•Start playback of the selected source.
5 Press REC to start recording.
™The REC starts flashing.
6Press Çto stop recording.
Notes:
–Only å or ∂ mode is available during recording .
–During recording, it is not possible to listen to another source.
Dubbing tapes tape deck 2)
1Press TAPE ( TAPE 1•2 ) to select tape deck 2.
2Load the prerecorded tape into tape deck 1 with full spool to the left and a blank tape into tape deck 2 with full spool aside.
3Press íor ëto select the recording tape side (see Tape Side under TAPE section).
22 | 6/8/01, 10:13 AM | 3139 116 19782 |